AMIKON is your best partne
|
|
Be sure there is adequate clearance for air circulation around the drive. For best air movement, do not mount GV3000/SE drives directly above each other. Note that no devices are to be mounted behind the drive. This area must be kept clear of all control and power wiring. Refer to figure 3.2 for recommended air flow clearances. It is important to verify that plant power will meet the input power requirements of the drive’s Power Module circuitry. Refer to table 2.1 for input power rating specifications.
|
|
|
3V4160 Data sheet
|
On the left side, these LED indicators are labeled as follows from top to bottom: “SPEED,” “VOLTS,” “AMPS,” “Hz,” “Kw,” “TORQUE,” and “Password.
|
|
On the right side, these LED indicators are labeled as follows from top to bottom: “RUNNING,” “REMOTE,” “JOG,” “AUTO,” “FORWARD,” “REVERSE,” and “PROGRAM.”
|
|
In addition to that, there are many buttons on the interface area. Below the LED indicators, there is a button labeled “STOP/RESET” and another button labeled “START.”
|
|
Award-winning service
|
More than 25 in stock
|
Full 12-month warranty
|
We deliver worldwide
|
sales7@amikon.cn 
86-18965423501 
86-18965423501 
AMKPLC 
