Email Us : info@sfyh.com

Company profile

Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipment, radar systems, digital radio frequency antenna and other fields worldwide for 18 years. Our high frequency PCBs are mainly built on 3 high frequency material brands: Rogers Corporation, Taconic and Wangling. Dielectric constant ranges from 2.2 to 10.2 etc.

All products

Rogers 4003 60mil 1.524mm RO4003C High Frequency RF PCB

RO4003C PCBs are hydrocarbon ceramic filled laminates, not PTFE which are designed to offer superior high frequency performance.

Rogers RO3003 High Frequency PCB 2 Layer 10mil DK3.0 DF 0.001 PCB

Rogers RO3003 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices.

Rogers RO3010 High Frequency 2-Layer 10mil Printed Circuit Board PCB

RO3010 laminates are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies.

Rogers RF PCB RO3210 25mil 0.635mm DK10.2 Immersion Gold

These RO3210 materials are engineered to offer exceptional electrical performance and mechanical stability. RO3210 laminates combine the surface smoothness of a non-woven PTFE laminate.

Rogers 6035 Double Sided 20mil Core With Immersion Gold PCB

RT/duroid 6035HTC laminates are an exceptional choice for high power applications.

TC350 Rogers RF PCB 30mil Double Sided Corel With Immersion Gold

TC350 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and insertion loss. Lower losses result in higher Amplifier and Antenna Gains/Efficiencies.

RT/Duroid 5880 20mil 0.508mm Rogers High Frequency PCB

This is a type of double sided RF PCB built on RT/duroid 5880 for the application of Radar Systems.

Rogers RO3035 High Frequency 2-Layer 10mil Circuit Board DK3.5 DF 0.0015

RO3035 materials exhibit a coefficient of thermal expansion(CTE) in the X and Y axis of 17 ppm/℃. This expansion coefficient is matched to that of copper, which allows the material to exhibit excellent dimensional stability.

Rogers 6006 High Frequency PCB Coating Immersion Gold and Green Mask

RT/duroid 6006 microwave laminates has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

High Frequency PCB Rogers 30mil 0.762mm RO4350B Double Sided RF Circuit Board

RO4350B material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. 

RO4003C LoPro PCB Rogers 12.7mil Reverse Treated Foil (RTF) Circuit Board

RO4003C LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4003C dielectric.

RO4350B LoPro High Frequency 10.7mil Rogers Reverse Treated Foil PCB

RO4350B LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4350B dielectric.

Rogers TMM3 High Frequency PCB 15mil 30mil 60mil DK3.27 RF PCB With Immersion Gold

Rogers' TMM3 high frequency laminates are ceramic, hydrocarbon, thermoset polymer composites designed for high PTH reliability stripline and microstrip applications.

Rogers TMM6 Microwave 20mil 50mil 75mil DK6.0 RF PCB With Immersion Gold

TMM6 has an exceptionally low thermal coefficient of dielectric constant.

RO4533 High Frequency Printed Circuit Board Rogers 20mil 30mil 60mil Antenna RF PCB

RO4533 High Frequency Laminates, ceramic-filled, glass-reinforced hydrocarbon based material, are cost/performance materials from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets.

Rogers RO4534 High Frequency 20mil 30mil 60mil Antenna PCB With ENIG and Immersion Tin

RO4534 High Frequency Laminates are ceramic-filled, glass-reinforced hydrocarbon based material which are cost/performance materials from Rogers Corporation.

Showing 1 to 1 of 1 (1 Pages)

click here to leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.