satra footwear testing standards-sfyh.com

Vamp Material Flexing Tester H049A

To determine flexing resistance or physical damage for all of vamp soft materials including leather, clothing and upholstery coverings. It also can be used to test seam construction during flexing.

Martindale Abrasion Tester H056A

To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.

Bally Leather Flexing Tester H053A

To determine resistance to flex property for leather, fabric, etc. Assess the flexing resistance of leather by damage condition of samples after flexing for a certain of times.

Martindale Abrasion Tester H056B

To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.

Circular Blade Cut Resistance Tester H061

To determine blade cut resistance property for the protective area of safety gloves in accordance with EN 388 (Clause 6.2), excluding the gloves made by very hard materials.

Leather Cracking Testing Machine H062A

UTS H062A Leather cracking testing machine is designed to test the cracking resistance index for uppers, various thin leather and surface of leather.

GB Shoe Peeling Strength Tester H066A

UTS H066A GB Shoe Peeling Strength Tester is suitable for the test method of peel strength between shoe sole and upper.

Density Balance & Densimeter H076

To test the density for Solid, liquid, powder and water absorbent material etc.

Thickness Gauge H079

This thickness is used to measure the thickness for leather, Synthetic and rubber. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. UTS uses a deadweight system removing the uncertainty of other mechanical devices.

Universal Testing Machine(Dual Column) H001

Tensile testing is used in many industries for research, quality and process control. It is designed to determine tensile, compression, bending, shearing force, bonding force, peeling, tearing test, etc, for leather, rubber, plastic, textile, metal, nylon thread, paper and materials of footwear, packaging, aviation, petrochemical, construction, electrical, vehicle, etc. The English software supplied runs on customers’ computer systems, the program provides a particular strength to the machine operation, allowing pre-load of a wide range of test methods and available for exporting, storage and analysis of results. Ready-to-load software together with specific test grips can be provided for various tests.

Brittleness Temperature Tester HP01

Brittleness Temperature Tester is to determine the brittleness characteristic during low temperature testing for wire jacket and vulcanized rubber. Sample is impacted by impact head at a linear speed of 2±0.2m/s after sample fixed onto the test device is soaked into a medium at low temperature for 5 minutes. And then check whether the sample appears cracks, crevices, small holes and fragments at the lowest temperature.

Melt Flow Index Tester HP03

Plastic melt flow index tester is used for determination of melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and science and research institute.

Micro-Computer Tensile Test Machine H004

This tensile tester has wide function with different clamps equipped to test tensile strength, elongation, tear, adhesion, tensile stress, stripping, shear force, bonding force between rubber and metal, etc. Applicable for shoe sole, tire, rubber tube, triangle tape, plastic sheeting, plastic sheet, packaging film, acrylic, FRP,ABS, EVA, PV, etc.

Dynamic Footwear Water Resistance Tester H007-4

This device is to determine all types of shoes dynamic water resistance property.

Steel Shanks Fatigue Resistance Tester H041

To determine the fatigue resistance property of steel shanks of various types of shoes under specified conditions.

Leather Softness Tester H055

Designed for coated fabric in the leather industry, textile industry and other flexible fabric softness and test design only. The material under test clamp on the known size of test hole, and then through a small aperture will load imposed on the fabric, on the dial pointer deflection value.

Shoelace Against Eyelets Abrasion Tester H048

To determine the the resistance of all shoelaces and eyelets to abrasion. The shoelace passes through the eyelet at a specified angle, and then shoelace moves up and down repeatedly under a standard load. 6 sets of specimens can be tested once.

Linear Abrasion Tester H067

This tester is suitable for testing the wear resistance property of plastic, auto parts, rubber, leather and textile, electroplating, free disassembly of components, paint, printing products, etc. Not only can be used to evaluate the product wear resistance, also can be used to evaluate the scratch resistance of the product single or multiple scratches and colours of transitivity. Dry abrasion test and wet abrasion test are available.