SBK Dry 380V to 200V 220V to 415V 440V Control Isolation Transformer
⇒ PRODUCT DESCRIPTION
Normal Use Condition:
1.Altitude: the altitude of the installation site does not exceed 2000m;
2. Temperature: the ambient air temperature does not exceed +40°C, and the average temperature within 24 hours does not exceed +35°C, and the lower limit of the ambient air temperature is -5°C;
3. Humidity: When the maximum temperature is +40°C, the relative humidity of the air does not exceed 50%; at a lower temperature, a higher relative humidity can be allowed, such as +20°C up to 90%; Installed without severe vibration and impact Vibration place;
4. In a non-explosive hazard medium, and there is no place in the medium that corrodes metals and destroys insulation gas and conductive dust.
5. Input and output voltage can be customized according to customer needs
| Phase |
Three Phase |
| Capacity |
0.5KVA-2000KVA |
| Input Voltage |
Various voltages can be customized according to user needs |
| Output Voltage |
Various voltages can be customized according to user needs |
| Output Voltage Accuracy |
±1% |
| Voltage Change Rate |
≤1.5% |
| Output Waveform Distortion |
No distortion (compared to the input waveform) |
| Insulation Class and IP Rating |
Class F, Class H and HC are available (normally Class F); IP Rating: IP00, IP20 etc. |
| Work Efficiency |
≥98% |
⇒ RELATED PRODUCT
1.BK Control Transformer
2.JBK Control Transformer
3.Toroidal Transformer
4.Single to Three Phase Convert
5.Single Phase Isolation Transformer
6.Three Phase Isolation Transformer
