sfp+ t sfp+ optical transceiver-sfyh.com

SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T

Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The 10/100Base-T module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Compatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

Compatible Cisco SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. 1G RJ45 SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45

10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.

Compatible Cisco SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver

10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.

Finisar FWLF1632Rxx OC-48/STM-16 Fixed Channel 2.5G 160km DWDM SFP Transceiver

Finisar’s Dense Wavelength-Division Multiplexing (DWDM) transceivers offer DWDM transport with dramatically lower power and cost in a standard pluggable Small Form Factor Pluggable (SFP) package1 . The FWLF1632R is designed expressly for service providers deploying DWDM networking equipment in metropolitan access and core networks.

FWLF1631xx – Finisar 2.67 Gb/s 80km DWDM SFP Transceiver

Finisar’s Dense Wavelength-Division Multiplexing (DWDM) Small Form Factor Pluggable (SFP) transceivers address communication network optics requirements that necessitate lower power and cost parameters. The FWLF-1631-xx is designed expressly for service providers deploying SONET and DWDM networking equipment in metropolitan access and core networks; and is RoHS 5-of-6 compliant per Directive 2002/95/EC and Finisar Application Note AN-20384 . It is also compatible to Gigabit Ethernet data rate.

Original Finisar FWLF16197Dxx 1470-1610nm 8 CWDM Wavelengths 1.25G CWDM 100km Gbic Transceiver

Finisar’s FWLF16197Dxx CWDM Small Form Factor Pluggable (SFP) transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment. They are available in eight different CWDM wavelengths. Digital diagnostics functions are available via an IC serial bus. In addition, they comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).

Original Finisar FTRJ1523P1WTL 100Base ZX Distance SFP Modules

Finisar’s FTLF1523P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1 . They comply with SONET and SDH standards2 at OC-3 LR-2/STM L-1.2. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3 . See Finisar Application Note AN-2038 for more details4 .

FWLF1521P2Nxx Finisar OC-48/STM-16 2.67 Gb/s -10/85°C 50km CWDM Pluggable SFP Transceiver

Finisar’s FWLF1521P2Nxx CWDM Small Form Factor Pluggable (SFP) transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET ,Gigabit Ethernet and Fibre Channel networking equipment. They are available in eight different CWDM wavelengths and comply with ITU CWDM standard . Digital diagnostics functions can be accessed via an I2C serial bus. In addition, the transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead free compliant per Directive 2002/95/EC and Finisar Application Note AN-2038

Original Finisar FTRJ1523P1BTL 100Base-ZX SFP Modules

Finisar’s FTLF1523P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1 . They comply with SONET and SDH standards2 at OC-3 LR-2/STM L-1.2. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3 . See Finisar Application Note AN-2038 for more details4 .

Original Finisar FTRJ1422P1BTL 622M-EX SFP Optical Modules

Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

FWLF2519C1Cxx Finisar SFP 125M-1.25Gbps 50km Multi-Rate Smart CWDM SFP Transceiver

Finisar Smart SFPs are compatible with SFP Multi-Sourcing Agreement (MSA). In addition to local digital diagnostics functions via the 2-wire series bus specified in the SFP MSA, Smart SFPs also support remote digital diagnostics functions, i.e., when a pair of Finisar’s Smart SFPs are on the same optical link, each end is capable of reading digital diagnostics information from the other end. This function is accessed via a nonintrusive optical communication channel.

Original Finisar FTRJ1422P1WTL 622M 40km SFP Optical Modules

Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Original Finisar FTLF1422P1XTL 622M EX SFP Optical Modules

Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Original Finisar FTLF1422P1BTL 622M EX SFP Optical Transceivers

Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Original Finisar FTRJ1422P1XTL 622M EX SFP Fibre Optical Module

Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1424P2xTR 4 Gigabit RoHS Compliant Long-Wavelength 4.25G-LR Optical Fiber SFP Transceiver

Finisar’s FTLF1424P2xTR and FTLF1424P2xTD Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are compatible with Fibre Channel per FC-PI-2 Rev. 10.0. Rate selectable versions are also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3. The product is RoHS compliant and lead-free per Directive 2002/95/EC4 and Finisar Application Note AN-2038.

Original Finisar FTLF1522P1XTL 622M ZX 1550nm SFP Fibre Optical Module

Finisar’s FTLF1522P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-2/STM L-4.2. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/ EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTRJ1522P1WTL 622M 80km 1550nm SFP Fibre Optical Module

Finisar’s FTLF1522P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-2/STM L-4.2. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/ EU3. See Finisar Application Note AN-2038 for more details4.