Shoelace Rubbing Tester GT-KC02
|
Application: This Shoelace Rubbing Tester is used to test the abrasion resistance for shoelace of cotton, hemp, chemical fiber or other materials. Standards: DIN 4843; SATRA TM 154; ISO 22774; QB/T 2226; GB/T 3903.36 |
Take two shoelace, mutually hook in the middle. Clamp the both ends of the shoelace at the movable fixture of shoelace rubbing tester, which can make reciprocating linear motion; clamp one end of the other shoelace on the corresponding fied fixture and another end of the shoelace round by a fixed pulley and hanging the a weight. Make the two shoelace abrasion each other by reciprocating linear motion. Then check the wear resistance, when the machine run up to pre-set times, the machine stop.
Model |
GT-KC02 |
Test position |
4 groups |
Control |
Touch-screen control, 0~999,999 |
Min. Separation between movable and fixed fixtures |
280 ±50 mm |
Movable fixture stroke |
35± 2 mm |
Test speed |
60 ± 6 cyles/min |
Profile board |
Angle 52.5degree; Length120 mm |
Stainless metal strip |
W: 25mm, L: 250mm |
Weight |
250 ± 3g |
Power supply |
1∮AC 220V 50/60HZ |
Dimensions ( L x W x H ) |
66 x 58 x 42cm |
Weight |
50 kg |
Standards |
DIN 4843 SATRA TM 154 ISO 22774 QB/T 2226 GB/T 3903.36 |
All kinds of shoelace materials can be tested on the Shoelace Rubbing Tester GT-KC02.
