Skyward telecom-sfyh.com

QSFP-H40G-AOC10M 40GBASE Active Optical Cable, 10m

Active optical cables are much thinner and lighter than copper cables, which makes cabling easier.

QSFP-H40G-AOC3M 40GBASE Active Optical Cable, 3m

The Cisco QSFP-H40G-AOC3M 40GBASE QSFP (Quad Small Form-Factor Pluggable) copper direct-attach 40GBASE-CR cables offers a very cost effective way to establish a low-power 40 Gigabit Ethernet connectivity options for data center.

N77-HV-3.5KW Nexus 7700 - 3.5KW High Voltage Power Supply Module

The Cisco Nexus® 7700 platform 3.5-kW high-voltage (HV) power supply module (Figure 1) delivers high efficiency, fault tolerance, load sharing, and hot-swappable features to Cisco Nexus 7700 platform switches. The Cisco Nexus 7700 platform chassis can accommodate multiple power supply modules, providing both chassis-level and facility‑level power fault redundancy.

N7K-AC-3KW Nexus 7000 - 3.0KW AC Power Supply Module (

The Cisco Nexus® 7000 Series AC power supply modules deliver fault tolerance, high efficiency, load sharing, and hot-swappable features to the Cisco Nexus 7000 Switches. Each Cisco Nexus 7000 chassis can accommodate multiple power supplies, providing both chassis-level and facility-level power fault tolerance.

QSFP-H40G-AOC5M 40GBASE Active Optical Cable, 5m

QSFP+ transceivers are designed for bi-directional serial-optical data communication, allowing network managers to cost-effectively upgrade enterprise networks to accommodate newer, more data-intensive services.

QSFP-H40G-AOC7M 40GBASE Active Optical Cable, 7m

AOCs enable efficient system airflow and have no EMI issues, which is critical in high-density racks.

QSFP-H40G-CU1M 40GBASE-CR4 Passive Copper Cable, 1m

40GBASE-CR4 PASSIVE-COP CBL 1M FACTORY

N7K-AC-6.0KW Nexus 7000 - 6.0KW AC Power Supply Module

The Cisco Nexus® 7000 Series AC power supply modules deliver fault tolerance, high efficiency, load sharing, and hot-swappable features to the Cisco Nexus 7000 Switches. Each Cisco Nexus 7000 chassis can accommodate multiple power supplies, providing both chassis-level and facility-level power fault tolerance.

N7K-AC-6.0KW= Nexus 7000 - 6.0KW AC Power Supply Module，spare

The Cisco Nexus® 7000 Series AC power supply modules deliver fault tolerance, high efficiency, load sharing, and hot-swappable features to the Cisco Nexus 7000 Switches. Each Cisco Nexus 7000 chassis can accommodate multiple power supplies, providing both chassis-level and facility-level power fault tolerance.

QSFP-H40G-CU5M 40GBASE-CR4 Passive Copper Cable , 5m

Transition Networks’ 40 Gig QSFP+ modules are ideal for cost-effectively upgrading your network.

PVDM3-192 192-channel high-density voice DSP module

The PVDM3 brings new rich-media capabilities to Cisco® Unified Communications Solutions. High-density voice connectivity.

N7K-C7010 10 Slot Chassis. No Power Supplies. Fans Included

The Cisco Nexus 7000 Series is a modular data center-class switching system designed for 10 Gigabit Ethernet networks. The Cisco Nexus architecture scales beyond 15 terabits per second. This platform is designed for exceptional scalability, continuous systems operation, and transport flexibility.The Cisco Nexus 7000 Series is purpose-built for the data center and has many unique features and capabilities designed specifically for the most mission-critical place in the network, the data center.

N7K-DC-3KW Nexus 7000 - 3.0KW DC Power Supply Module

The Cisco Nexus® 7000 Series AC power supply modules (Figures 1, 2, and 3) deliver fault tolerance, high efficiency, load sharing, and hot-swappable features to the Cisco Nexus 7000 Switches. Each Cisco Nexus 7000 chassis can accommodate multiple power supplies, providing both chassis-level and facility-level power fault tolerance.

N7K-DC-6.0KW Nexus 7000 - 6.0KW DC Power Supply Module (Cables Included)

The Cisco Nexus® 7000 Series Switches support power supplies specifically designed for DC environments. The Cisco Nexus 7000 3.0-kW DC Power Supply Module scales from 1500W to 3000W and the Cisco Nexus 7000 6.0kW DC Power Supply scales from 1500W to 6000W. The DC power supplies deliver fault-tolerant load-sharing capability together with full support for hot-swappable DC power to the Cisco Nexus 7000 Series

PVDM3-256 256-channel high-density voice DSP module

Cisco PVDM3-256 256-Channel High-Density Voice Video Module.

XENPAK-10GB-LRM 10G Base LRM Xenpak

The Cisco 10GBASE-SR Module supports a link length of 26 meters on standard FDDI grade MMF. Up to 300-meter link lengths are possible when using 2000 MHz/km MMF (OM3).

X2-10GB-LRM 10GBASE-LRM X2 Module

The X2-10GB-LRM, like all of our hardware, is fully inspected and repackaged in our ESD & OEM compliant facility and comes backed by a comprehensive warranty as standard.

X2-10GB-LX4-RF 10GBASE-LX4 X2 Module REMANUFACTURED

Cisco 10GBASE-LX4 X2 transceiver module for MMF, 1310-nm wavelength, SC duplex connector (Refurbished).

N7K-F248XP-25E Nexus 7000 F2-Series 48 Port 1/10G (SFP+) Enhanced

The Cisco Nexus 7000 Enhanced F2-Series 48-Port Fiber 1 and 10 Gigabit Ethernet Module offers outstanding flexibility and wire-rate performance on each port. The module enables the deployment of high-density, low-latency, scalable data center architecture.The Cisco Nexus 7000 series switch provides the foundation for the Cisco unified fabric. It is a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks. The fabric architecture scales beyond 15 terabits per second, designed to support future 40 and 100 Gigabit Ethernet interfaces. To meet the requirements of the most mission-critical network environments, the switches deliver continuous system operations and virtualized services.

WS-X6904-40G-2T Catalyst 6900 Series 4-port 40G/16-port 10G Fiber Mod DFC4

The module is primary designed for campus, data center and service provider, as well as for high-density 10 Gigabit Ethernet and 40 Gigabit Ethernet transport in the core.

N7K-M148GS-11L Nexus 7000 - 48 Port GE Module with XL Option (req. SFP)

The Cisco Nexus 7000 Series 48-Port Gigabit Ethernet Modules with XL Option are highly scalable modules designed for performance-driven, mission-critical Ethernet networks. The modules use the M1-XL forwarding engine, providing a throughput of up to 60 million packets per second (Mpps) and a large Forwarding Information Base (FIB) - making them ideal for deployment at an Internet exchange point (IXP), a service provider, or a large enterprise.

N9K-C93108TC-EX Nexus 9300 with 48p 10G BASE-T and 6p 100G QSFP28

The Cisco Nexus 93108TC-EX switch is a 1RU switch that supports 2.16 Tbps of bandwidth and over 1.7 bpps. The 48 10GBASE-T downlink ports on the 93108TC-EX can be configured to work as 100-Mbps, 1-Gbps, or 10-Gbps ports. The uplink can support up to six 40- and 100-Gbps ports, or a combination of 10-, 25-, 40-, 50-, and 100-Gbps connectivity, offering flexible migration options.

N9K-C93120TX Nexus 9300 with 96p 1/10G-T and 6p 40G QSFP

Organizations everywhere recognize that changing application environments are creating new demands for the IT infrastructure that supports them. Application workloads are deployed across a mix of virtualized and nonvirtualized server and storage infrastructure, requiring a network infrastructure that provides consistent connectivity, security, and visibility across a range of bare-metal, virtualized, and cloud computing environments:The Cisco Nexus 9300 platform switches are high-density, nonblocking, low-power-consuming switches designed for ToR, MoR, and end-of-row (EoR) deployment in enterprise data centers, service provider facilities, and large virtualized and cloud computing environments.The Cisco Nexus 93120TX Switch is a 2RU switch that supports 2.4 Tbps of bandwidth and over 1500 mpps across 96 fixed 1/10G BASE-T ports and 6 fixed 40-Gbps QSFP ports. The Cisco Nexus 9300 platform can support multiple racks (or pods) of dense 1RU servers. The Cisco Nexus 93120TX can provides 10 Gigabit Ethernet connectivity to all servers across two racks, with a pair of these switches providing full redundancy. In less dense configurations with 2RU servers, the Cisco Nexus 9300 platform can support even more racks of servers in an MoR configuration.

N9K-C93180YC-EX Nexus 9300 with 48p 10/25G SFP+ and 6p 100G QSFP28

The Cisco Nexus 93180YC-EX is a 1-rack-unit (1RU) switch that supports 3.6 terabits per second (Tbps) of bandwidth and over 2.8 billion packets per second (bpps). The 48 downlink ports on the 93180YC-EX can be configured to work as 1-, 10-, or 25- Gbps ports, offering deployment flexibility and investment protection. The uplink can support up to six 40- and 100-Gbps ports, or a combination of 10-, 25-, 40-, 50-, and 100-Gbps connectivity, offering flexible migration options.

N9K-C93180YC-FX Nexus 9300 with 48p 10/25G SFP+. 6p 100G QSFP. MACsec. UP

Get high-density, nonblocking, and low-power 10/25-Gbps ports with the Nexus 93180YC-FX. This SFP-based switch supports Cisco Tetration Analytics for deep telemetry and Cisco Application Centric Infrastructure (ACI). It's ideal for leaf-and-spine deployment in enterprise, service provider, large virtualized, and cloud environments.

N9K-C9372PX Nexus 9300 with 48p 10G SFP+ and 6p 40G QSFP+

The Cisco Nexus 9372PX Switch provides a line-rate layer 2 and layer 3 feature set in a compact form factor. It offers a flexible switching platform for both 3-tier and spine-leaf architectures as a leaf node. With the option to operate in Cisco NX-OS or Application Centric Infrastructure (ACI) mode, it can be deployed in small business, enterprise, and service provider architectures.

N9K-C9372PX-E Nexus 9300 with 48p 10G SFP+ and 6p 40G QSFP+

The Cisco Nexus 9372PX-E Switch is a 1-rack unit switch that supports forty-eight 1 Gigabit and 10 Gigabit SFP+ downlink ports, six 40 Gigabit QSFP+ uplink ports, one 100/1000 network management ports, one RS-232 console port for setting the initial switch configuration and two USB ports for saving or loading switch configurations. This versatile modular switch comes with advanced networking features like ACL support, HSRP support, IGMP snooping, MSTP support, PVRST, QoS, vPC technology, VRF, VLAN support and VXLAN tunnel endpoints support. It can be placed on the desktop or mounted on the wall to save space. With a latency of 1 to 2 microseconds, the network switch supports 1.44 Tbps of bandwidth in a 1 RU form factor.Offers a flexible switching platform for 3-tier and spine-leaf architectures as a leaf nodeGigabit switch can be deployed in small business, enterprise and service provider architecturesCisco NX-OS Software is designed for performance, scalability and manageabilityHighly efficient design for a reliable performance

N9K-C9372TX-E Nexus 9300 with 48p 1/10G-T and 6p 40G QSFP+

The Cisco Nexus 9372TX Switch offers a line-rate layer 2 and layer 3 feature set in a compact form factor. It offers a flexible switching platform for both 3-tier and spine-leaf architectures as a leaf node. With the option to operate in Cisco NX-OS or Application Centric Infrastructure (ACI) mode, it can be deployed within small business, enterprise, and service provider architectures.

DS-SFP-FC8G-SW 8 Gbps Fibre Channel SW SFP+. LC

The Cisco Small Form-Factor Pluggable (SFP) for use on the Cisco MDS 9000 family of products are hot-swappable transceivers that plug into ports on the Cisco MDS 9000 family director switching modules and fabric switches. These transceivers give users the flexibility to choose different cabling types and distances on a port-by-port basis.

DS-SFP-FC16G-SW 16 Gbps Fibre Channel SW SFP+. LC

SFP+ transceiver module - 16Gb Fibre Channel (SW) - fiber optic - LC multi-mode - up to 1310 ft - 850 nm - for P/N: DS-X9448-768K9=.

DS-SFP-FC-2G-SW Compatible 2G Fiber Channel SFP 850nm 300m DOM Transceiver Module

Cisco DS-SFP-FC-2G-SW Compatible 2G Fiber Channel SFP Transceiver Module (MMF, 850nm, 300m, LC, DOM).

DS-SFP-FC-4G-SW ompatible 4G Fiber Channel SFP 850nm 380m DOM Transceiver Module

Cisco DS-SFP-FC4G-SW Compatible 4G Fiber Channel SFP Transceiver Module (MMF, 850nm, 380m, LC, DOM)

EHWIC-3G-EVDO-S 3G EHWIC EDVO for Sprint with GPS

The 3G EHWIC EVDO version card is a multiband, multiservice WAN card. Its primary application is WAN connectivity as a backup data-link for critical data applications and as a primary WAN connection.The 3G EHWIC EVDO version card supports the ISR G2 platforms. The 3G EHWIC EVDO version card houses one cellular modem for connection to a wireless WAN.

EHWIC-4ESG Four port 10/100/1000 Ethernet switch interface card

The Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports. These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device. The Gigabit Ethernet EHWICs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports.

EHWIC-4ESG-P Four port 10/100/1000 Ethernet switch interface card w/PoE

The Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports. These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device. The Gigabit Ethernet EHWICs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports.

WS-C6506-E Catalyst 6500 Enhanced 6-slot chassis,12RU,no PS,no Fan Tray

The 6500-E series switches offer enhancements to scale beyond the 4000W power supply.

EHWIC-4SHDSL-EA Multi mode 4 pair G.SHDSL EFM and ATM mode

The single-port Cisco Multimode Four-Pair G.SHDSL Double Wide Enhanced High-Speed WAN Interface Card (EHWIC-4SHDSL-EA) offers G.SHDSL-based WAN connectivity using both 802.3ah Ethernet in the First Mile (EFM) and ATM modes on a single enhanced high-speed WAN interface card (EHWIC). Both modes are not supported simultaneously. This EHWIC will be used in modular routers that are deployed in small to medium-sized businesses (SMBs) and enterprise branch offices.

EHWIC-8ESG-P Cisco Router Ethernet Switch Card

Cisco EHWIC-D-8ESG-P is the 8 ports POE high-speed Gigabit Ethernet interface module for 1900/2900/3900 series ISR2 router. The low-density Gigabit Ethernet interface switching module designs for small to medium-size business or branch offices to reduce the total cost of ownership and simplified management by integrating switching and routing functionality into a single chassis. Moreover, the switching module enables Cisco's industry-leading power initiatives, Cisco EnergyWise, Cisco Enhanced Power over Ethernet (ePoE), and per-port Power over Ethernet (PoE) power monitoring, which enhance the ability of the branch office to scale to higher performance requirements and still meet environmental initiatives for IT teams to operate a power-efficient network.

EHWIC-D-4ESG Four port Ethernet switch interface card

Cisco EHWIC-4ESG Ethernet Enhanced High-Speed WAN Interface Card equips with 4 × 10/100/1000 switch ports to integrate with Cisco Integrated Services Routers Generation 2 (ISR2).

EHWIC-D-8ESG Eight port 10/100/1000 Ethernet switch interface card

8PORT 10/100/1000 ETHERNET

Company profile

All products