Skyward telecom-sfyh.com

WS-C6506-E-FAN Catalyst 6506-E Chassis Fan Tray

Cisco Catalyst 6506-E Chassis Fan, WS-C6506-E-FAN.

WS-X4712-SFP+E Catalyst 4500 E-Series 12-Port 10GbE (SFP+)

E-series line card provides increased switching capacity per slot.

WS-X4748-RJ45-E Catalyst 4500 E-Series 48-Port 10/100/1000 Non-Blocking

Cisco 4500 Line Card WS-X4748-RJ45-E Catalyst 4500 E-Series 48-Port 10/100/1000 Non-Blocking.

WS-X4748-RJ45V+E Catalyst 4500E 48-Port PoE 802.3at 10/100/1000(RJ45)

Cisco 4500 Line Card WS-X4748-RJ45V+E Catalyst 4500E 48-Port PoE 802.3at 10/100/1000(RJ45).

WS-X4908-10GE 8 port 2:1 10GbE (X2) line card for 4900M series

With the Catalyst 5000 Family, Cisco provides a cost-effective, switched Ethernet and 10/100 alternative to shared hubs in the wiring closet.

WS-X6824-SFP-2TXL Catalyst 6500 24-port GigE Mod: fabric-enabled with DFC4XL

Cisco 6500 Module WS-X6824-SFP-2TXL Catalyst 6500 24-port GigE Mod: fabric-enabled with DFC4XL.

EHWIC-D-8ESG-P Eight port 10/100/1000 Ethernet switch interface card w/ PoE

The Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports. These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device. The Gigabit Ethernet EHWICs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports.

EHWIC-VA-DSL-A Multi Mode VDSL2/ADSL/2/2+ EHWIC Annex A

The Cisco Multimode EHWIC-VA-DSL-A High-Speed WAN Interface Card equips with 1 RJ-11 port to support multimode VDSL2 and ADSL2/2+ WAN connectivity over the plain old telephone service. This WAN interface module provides High-speed WAN connection between Central office and customer premises equipment. the capability enables service providers and resellers to offer additional services such as business-class security; voice, video, and data; differentiated classes of service (QoSs); and managed network access with Cisco IOS software over existing telephony infrastructure. This network module support entire Cisco ISR G2 router platform with Cisco IOS 15.1(3)T/15.1(4)M or later release.

WS-CAC-6000W Cat6500 6000W AC Power Supply

Its provides 6000 Watts of output power if both inputs are 220 VAC and 2900W if both inputs are active.

EHWIC-VA-DSL-B Multi Mode VDSL2/ADSL/2/2+ EHWIC Annex B

The Cisco Multimode VDSL2 and ADSL2/2+ EHWIC (EHWIC-VA-DSL) provides 1-port multimode VDSL2 and ADSL2/2+ WAN connectivity (Figure 1). In combination with the Cisco 1921 and 1941 Integrated Services Routers (ISRs) and Cisco 2900, 3900, and 3900E Series ISRs, this EHWIC provides high-speed digital data transmission between customer premises equipment (CPE) and the central office (DSL access multiplexer [DSLAM]), usually located on the telephone company premises. This capability enables service providers and resellers to offer additional services such as business-class security; voice, video, and data; differentiated classes of service (QoSs); and managed network access with Cisco IOS? Software over existing telephony infrastructure. These value-added features, along with the flexible manageability and reliability of Cisco IOS Software, provide the mission-critical networking features that businesses expect.

EHWIC-VA-DSL-M Multi Mode VDSL2/ADSL/2/2+ EHWIC Annex M

The Cisco Multimode VDSL2 and ADSL2/2+ EHWIC (EHWIC-VA-DSL) provides 1-port multimode VDSL2 and ADSL2/2+ WAN connectivity (Figure 1). In combination with the Cisco 1921 and 1941 Integrated Services Routers (ISRs) and Cisco 2900, 3900, and 3900E Series ISRs, this EHWIC provides high-speed digital data transmission between customer premises equipment (CPE) and the central office (DSL access multiplexer [DSLAM]), usually located on the telephone company premises. This capability enables service providers and resellers to offer additional services such as business-class security; voice, video, and data; differentiated classes of service (QoSs); and managed network access with Cisco IOS? Software over existing telephony infrastructure. These value-added features, along with the flexible manageability and reliability of Cisco IOS Software, provide the mission-critical networking features that businesses expect.

WS-F6700-DFC3A-RF Cat6500 Dist Fwd Card for WS-X67xx modules REFURBISHED

Catalyst 6500 Dist Fwd Card for WS-X67xx modules.

VIC2-2FXO Two-port Voice Interface Card - FXO (Universal)

The IP Communications High-Density Digital Voice/Fax Network Modules are an integral part of the Cisco Unified Communications offering, delivering a versatile combination of digital voice, analog voice, and data capabilities in a single network module form factor.

GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module. MMF/SMF. 1310nm. DOM

The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.

GLC-SX-MMD 1000BASE-SX SFP transceiver module. MMF. 850nm. DOM

The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.

GLC-ZX-SM 1000BASE-ZX SFP

The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.

HWIC-1ADSL 1-port ADSLoPOTS HWIC

Cisco Integrated Services Routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco ADSL2 and ADSL2+ high-speed WAN interface cards (HWICs) deliver business-class asymmetric DSL (ADSL) services for customers ranging from small-to-medium sized businesses to enterprise branch offices. Both, 1-port and 2-port HWIC cards are available. While the 1-port HWIC card has an ADSL port, the 2-port HWIC card has an ISDN BRI backup port in addition to the ADSL port.

HWIC-1ADSL-M 1-port ADSL HWIC w/Annex M

Cisco Integrated Services Routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco ADSL2 and ADSL2+ high-speed WAN interface cards (HWICs) deliver business-class asymmetric DSL (ADSL) services for customers ranging from small-to-medium sized businesses to enterprise branch offices. Both, 1-port and 2-port HWIC cards are available. While the 1-port HWIC card has an ADSL port, the 2-port HWIC card has an ISDN BRI backup port in addition to the ADSL port.

HWIC-1B-U 1-Port ISDN BRI U High-Speed WAN Interface Card

Cisco integrated services routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 1-Port BRI U High-Speed WAN Interface Card (HWIC) offers BRI-U-based WAN connectivity for modular routers deployed in small to medium-sized businesses (SMBs) and enterprise branch offices.

SPA-2XOC3-POS 2-port OC3/STM1 POS Shared Port Adapters

SPA-2XOC3-POS Catalyst 6500 Service Module

SPA-2XOC3-POS-V2 SPA-4XOC3-POS-V2 with a license to use 2 ports

Cisco ASR 9000 Adapter SPA-4XOC3-POS-V2 4-port OC-3/STM-1 POS Shared Port Adapters

SPA-4X1FE-TX-V2 Cisco 4-Port Fast Ethernet (TX) Shared Port Adapter

Cisco 4-Port Fast Ethernet (TX) Shared Port Adapter

SPA-IPSEC-2G 7600/Cat6500 IPSec VPN SPA - DES/3DES/AES REFURBISHED

Cisco 7600 / Catalyst 6500 IPSec VPN SPA - DES/3DES/AES.

VIC2-4FXO Four-port Voice Interface Card - FXO (Universal)

Cisco IP Communications solutions provide the means for integrating voice and data allowing users to take advantage of services such as IP telephony, integrated services, and toll-bypass.

HWIC-1CE1T1-PRI 1 port channelized T1/E1 and PRI HWIC (data only)

The Cisco® Channelized T1/E1 and ISDN PRI High-Speed WAN Module HWIC-1CE1T1-PRI combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. With flexible WAN connectivity options, together with integrated routing, security, voice, and wireless capabilities, the Cisco Integrated Services Routers can meet every need of enterprise-class branch offices today and in the future. Three versions are available, 1- and 2-port cards in a single-wide high-speed WAN interface card (HWIC), and a 8-port cards in a single-wide network module. The different versions help enable customers to deploy different port densities according to the needs of individual offices.

HWIC-1DSU-T1 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. These HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-1FE ^1-port 10/100 Routed Port HWIC

The Layer 3 Cisco 1-Port Fast Ethernet High-Speed WAN interface card (HWIC) supported on the Cisco 1841, Cisco 2800, and Cisco 3800 Series Integrated Services Routers offers small-to-large-sized businesses and enterprise branch-office customers the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities.

HWIC-1T 1-Port Serial WAN Interface Card

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. These HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-2CE1T1-PRI 2 port channelized T1/E1. and PRI HWIC (data only)

The Cisco® Channelized T1/E1 and ISDN PRI High-Speed WAN Module HWIC-2CE1T1-PRI combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. With flexible WAN connectivity options, together with integrated routing, security, voice, and wireless capabilities, the Cisco Integrated Services Routers can meet every need of enterprise-class branch offices today and in the future. Three versions are available, 1- and 2-port cards in a single-wide high-speed WAN interface card (HWIC), and a 8-port cards in a single-wide network module. The different versions help enable customers to deploy different port densities according to the needs of individual offices.

WS-C2960+48PST-S Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite

Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite.

C6800-16P10G-XL Catalyst 6800 16 port 10GE with integrated DFC4XL

C6800-16P10G-XL= - Cisco Catalyst 6800 Switch Module.

C6800-SUP6T-XL Catalyst 6800 Sup6T (440G/slot) with 8x10GE, 2x40GE (XL)

Catalyst 6800 Series Supervisor Engine 6T XL Spare - Sup6T (440G/slot) with 8x10GE, 2x40GE (XL).

C6832-X-LE Cisco Catalyst 6832-X-Chassis (Standard Tables)

C1-C6832-X-LE - Cisco ONE Catalyst 6800 Series Platform.

HWIC-2FE Two 10/100 routed port HWIC

The 2-port (HWIC-2FE) card offers small-to-large-sized businesses and enterprise branch-office customers the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities.

HWIC-2SHDSL 2-pair G.SHDSL HWIC

Cisco Integrated Services Routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 2- and 4-Pair Symmetric High-Bit-Rate DSL High-Speed WAN Interface Cards offer G.SHDSL based WAN connectivity for modular routers deployed in small to medium-sized businesses and enterprise branch offices. The 2-pair (HWIC-2SHDSL) and 4-pair (HWIC-4SHDSL) symmetric high-bit-rate DSL high-speed WAN interface cards (HWICs) provide G.SHDSL connectivity to a Wide Area Network. The 4-pair symmetric G.SHDSL HWIC provides two ports of 4-wire or four ports of 2-wire connectivity options, whereas the 2-pair G.SHDSL HWIC provides two ports of 2-wire or one port of 4-wire connectivity options. The 4-pair symmetric G.SHDSL HWIC also allows bonding single or dual-pair G.SHDSL ports up to a single 8-wire interface with increased bandwidth by using Inverse Multiplexing over ATM (IMA) or data interleaving with M-pair mode. These cards are supported in all integrated services routers that have HWIC slots.

HWIC-2T 2-Port Serial WAN Interface Card

Cisco HWIC-2T is a 2-port serial WAN interface card, made for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-4A/S 4-Port Async/Sync Serial HWIC

HWIC-4A/S is 4 ports low-speed synchronous/asynchronous interface module for 1800/1900/2800/2900/3800/3900 Series integrated services Routers. With integration of module to the router can either transporting traditional traffic across a TCP/IP network or connecting with console and craft ports to manage network remotely. HWIC-4T supports multiprotocol that includes EIA-232, EIA-449, V.35, and X.21 in DTE or DCE mode and EIA-530 and EIA-530A in DTE mode with low speed up to 256 Kbps.

Company profile

All products