socket and plug-sfyh.com

Socket-outlet Torque Balance

ZLT-LJ2, for measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2.

Flexing Test Swivel Machine

ZLT-DW2, for continuous bending tests by swivelling movements to check 6 cables simultaneously, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.

Equipment to Load the Samples with Current

ZLT-HZ1, installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.

Cord Anchorage Torque Test Device

ZLT-LJ3, this device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non detachable flexible cords according to IEC60884 1 clause 23.2(table 18),VDE0620 clause23.2(table18),IEC60335 1 table12 clause 25.15.

Ball Pressure Test Device

ZLT-QY1, to determine the dimensional stability of parts consisting of non-ceramic, non metallic insulating materials according to IEC60695 10 2, IEC60335 1 clause 30.1, IEC60598 1 clause 13.2.1 Fig.10, IEC60884 Fig.37, IEC60320 Fig. 23, VDE 0620 Fig.19, IEC60669 1 Fig.25, IEC60670 Fig.5, IEC60967 Fig. 19, etc

Tumbling Barrel Test Machine

ZLT-GT1, is to determine the mechanical strength of lamp or electrical appliances or electrical components in accordance with IEC60598 figure 25 and VDE0620 Bild 27.

Cord Anchorage Testing Machine

ZLT-DY1, for testing cable connections with intermittent tensile load in according to IEC60884/2006 figure 20, VDE0620 Bild 20.

Heat Compression Test Apparatus

ZLT-RS1, to determine the verification of resistance of accessories and surface type mounting at a temperature of (80±2)℃, according to IEC 60884 1 figure 38 and clause 25.4, VDE 0620 figure 37, BS 1363 figure 23.

Verify the Fixation of Pins in the Body of the Plug Test Device

ZLT-CX1, to determine the fixation of pins in the body of the plug, conform to IEC60884 1 figure 30.

Socket Plug Strength Test Device

ZLT-CB1, for verification of the maximum and minimum withdrawal force of the socket and plug, according to IEC60884 1 figure 18 and 19, VDE0620-2005 bild 19.

Indentation Test Device

ZLT-HP1, for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10.

Clamping Device Test Machine

ZLT-DSG2, to test the reliability of clamping devices to hold flexible electrical conductors, according to IEC60884 1 figure 11 and clause 12.2.5, VDE0620

Flexion Test Apparatus

ZLT-DSG3, similar to ZLT DSG2, but according to IEC60947 figure 1 and clause 8.2.4.3, table 5

Lateral Strain Test Device

ZLT-HY1, to determine the lateral strain imposed by equipment likely to be introduced into the socket outlets, which having ratings up to and including 16 A and 250 V, in according to IEC60884-1 figure 13 and clause 13.14, VDE0620,

Compression Test Device

ZLT-YS1, to determine the contact pressure of side earthing contacts of socket outlets, the temperature of the pressure plate, of the base and of the specimens being (23±2)℃ and the force applied being 300 N, in accordance with IEC60884 1 figure 8, VDE0620 figure 8.