Low Light Performance
Under morning and evening low light conditions, the maximum power point can still be quickly tracked.In the daytime light changes, can be timely and accurate response and tracking.Achieving the effective combination of low disturbance amplitude and high reaction speed.To identify the maximum power point in the case of multiple peaks.
Electrical Protection
When the solar panel lake or load short circuit, the controller will immediately stop charging or cut off the output, protect the battery from damage.When the voltage of the battery is higher than that of the solar panel at night, the current will start to flow from the battery to the solar panel.
This will damage the solar panel and the controller will not reverse discharge.
Large-Diameter Terminal
The controller can realize the direct current of the solar panel to the load, which can reduce the charging and discharging times of the battery and prolong the life of the battery.But do not allow the system without battery.The controller has a variety of load control modes, can automatically detect the dawn and dark, and can set the time.Could automatically load on and off.
Packaging And After-Sales
Including controller and instructions. Factory warranty, MPPT controller provides a 3-year warranty. During the warranty period, there is a non-artificial product failure, our company promises to replace it free of charge.
MPPT Solar Charge Controller Features:
-
Able to automatically detect battery voltage.
-
Prevent the battery from overcharging and over-discharging, and prolong the service life of the battery.
-
The output current exceeds 1.1 times the rated current of the controller, the controller will cut off the output to protect the controller.
-
Real-time display of charging power, and statistical records
-
When the solar panel or load short-circuit occurs, the controller will immediately stop charging or cut off the output to protect the battery from damage.
-
When the battery voltage exceeds 16.5V, the controller will stop charging and cut off the output.
