solar module-sfyh.com

Solar module

MONO PERC MODULE

Double-glazing Bifacial Half Cell Module PERC

The conversion efficiency of the module reaches up to 20.3%. As a bifacial module, it can generate more power over 25% compared with that of the conventional module. It has a wide range of application scenarios. The half-cell technology not only produces higher power and less heat loss, but also reduces the influence of shadow on the power generation. Its internal power loss is reduced to 1/4 of that of the whole module. And the shadow shielding loss is less than that of the whole, thus increasing the power by 5%.

Half Cell Mono PERC Solar Module 120P

The conversion efficiency of the components reaches 20.4%, and the half-piece technology is used to reduce the hot spot effect, reduce the working temperature and effectively improve the power generation efficiency.

144P Solar mono perc half-cell Module

410WP module power will maximize system capacity and increase power generation. The conversion efficiency of the components reaches more than 20.4%, and the half-cell technology is used to reduce the hot spot effect, reduce the working temperature and effectively improve the power generation efficiency.

Lightweight Mono PERC High Density Module

The lightweight mono PERC module is 75% lighter compared with the normal one. There is no need to fix the mounting system, the weight of the PV power station is greatly reduced. Thus without sufficient load, the PV power station can also be built in the metal sheet roof.

Half Cell Mono PERC

The conversion efficiency of the modules reaches 20.6%, and the half-piece technology is used to reduce the hot spot effect, reduce the working temperature and effectively improve the power generation efficiency.

525W-550W Mono Solar Panels Half Cut 144 Cell Photovoltaic Module

With 182mm Cells Mono PERC with MBB & Half-cut Technology, Sunpal HiMAX5 144 Cell Series Solar Panel Power Range 525W 530W 535W 540W 545W 550W.

6 inch 72 cells(320~365W) Mono Panel Module

EverExceed 156x156 Mono Solar photovoltaic modules are built with EverExceed's highly regulated manufacturing standards and latest Standard technology. EverExceed's Monocrystalline Standard Modules are built to deliver the most cost effective performance. Pluto's extra fine cell fingers (~30μm), reduce surface shading and boost sunlight absorption into the cell and give the product a sleek appearance.

7 inch 144 cells(520~550W) PERC half-cut Solar Module

EverExceed 144 cells half cut solar modules are assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.