Special Offers
Products
Circular Blade Cut Resistance Tester H061
To determine blade cut resistance property for the protective area of safety gloves in accordance with EN 388 (Clause 6.2), excluding the gloves made by very hard materials.
Leather Cracking Testing Machine H062A
UTS H062A Leather cracking testing machine is designed to test the cracking resistance index for uppers, various thin leather and surface of leather.
GB Shoe Peeling Strength Tester H066A
UTS H066A GB Shoe Peeling Strength Tester is suitable for the test method of peel strength between shoe sole and upper.
Density Balance & Densimeter H076
To test the density for Solid, liquid, powder and water absorbent material etc.
Thickness Gauge H079
This thickness is used to measure the thickness for leather, Synthetic and rubber. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. UTS uses a deadweight system removing the uncertainty of other mechanical devices.
Universal Testing Machine(Dual Column) H001
Tensile testing is used in many industries for research, quality and process control. It is designed to determine tensile, compression, bending, shearing force, bonding force, peeling, tearing test, etc, for leather, rubber, plastic, textile, metal, nylon thread, paper and materials of footwear, packaging, aviation, petrochemical, construction, electrical, vehicle, etc. The English software supplied runs on customers’ computer systems, the program provides a particular strength to the machine operation, allowing pre-load of a wide range of test methods and available for exporting, storage and analysis of results. Ready-to-load software together with specific test grips can be provided for various tests.
Brittleness Temperature Tester HP01
Brittleness Temperature Tester is to determine the brittleness characteristic during low temperature testing for wire jacket and vulcanized rubber. Sample is impacted by impact head at a linear speed of 2±0.2m/s after sample fixed onto the test device is soaked into a medium at low temperature for 5 minutes. And then check whether the sample appears cracks, crevices, small holes and fragments at the lowest temperature.
Melt Flow Index Tester HP03
Plastic melt flow index tester is used for determination of melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and science and research institute.
Micro-Computer Tensile Test Machine H004
This tensile tester has wide function with different clamps equipped to test tensile strength, elongation, tear, adhesion, tensile stress, stripping, shear force, bonding force between rubber and metal, etc. Applicable for shoe sole, tire, rubber tube, triangle tape, plastic sheeting, plastic sheet, packaging film, acrylic, FRP,ABS, EVA, PV, etc.
Dynamic Footwear Water Resistance Tester H007-4
This device is to determine all types of shoes dynamic water resistance property.
Steel Shanks Fatigue Resistance Tester H041
To determine the fatigue resistance property of steel shanks of various types of shoes under specified conditions.
Leather Softness Tester H055
Designed for coated fabric in the leather industry, textile industry and other flexible fabric softness and test design only. The material under test clamp on the known size of test hole, and then through a small aperture will load imposed on the fabric, on the dial pointer deflection value.
Shoelace Against Eyelets Abrasion Tester H048
To determine the the resistance of all shoelaces and eyelets to abrasion. The shoelace passes through the eyelet at a specified angle, and then shoelace moves up and down repeatedly under a standard load. 6 sets of specimens can be tested once.
Linear Abrasion Tester H067
This tester is suitable for testing the wear resistance property of plastic, auto parts, rubber, leather and textile, electroplating, free disassembly of components, paint, printing products, etc. Not only can be used to evaluate the product wear resistance, also can be used to evaluate the scratch resistance of the product single or multiple scratches and colours of transitivity. Dry abrasion test and wet abrasion test are available.
Maeser Water Penetration Tester H050
This machine is used to measure the ability of the shoe surface material to resist water penetration during flexing.
Compression Rebound Tester H030
This machine is used to test the resilience of rubber products after a certain amount of time and pressure.
Compression and deformation tester H031
The instrument is used in static compression test of rubber.
Vertical Rebound Resilience Tester H090
To determine the impact resilience of solid rubber from measurement of the vertical rebound of a dropped mass. It is not applicable to the testing of cellular rubbers or coated fabrics.
Slip Resistance Tester H043
To test the friction coefficient of finished shoe sole, sole front or heel, so as to determine shoes slip resistance property.
Circular Rubbing Colour Fastness Tester H072
To determine the damage and color transfer of materials such as upper materials, leather, plastics and textiles. 5 test methods such as dry, wet, perspiration, alcohol and organic solution are available.
