Power Cord Flexibility Tester

ZLT-JDW3R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 -1. 3 Working Station for 3 specimens simultaneously.

Graphite Powder for Battery Anode Materials

Graphite powder is a kind of important battery anode material.

Abrasion Resistance Testing Machine

ZLT-DYJ2. To determine the durability of cable coverings, flexible insulating tubing, coats of lacquer, inscriptions, designations and the like at room temperature by scraping to and fro, according to UL1581 test 1690, EN 60730

High Putity Lithium Ion LTO Titanate Powder Oxide Powder

Lithium titanate oxide powder for battery anode materials with high purity.

Tinsel Cord Bending Test Apparatus

ZLT-JDW2R. To determine the bendability of the tinsel cord,in accordance with IEC 60227-2 clause 3.2 ,figure 2 and IEC 60227-1 clause 5.6.3.2.

Thickening Agent Material Carboxymethyl Cellulose CMC powder Price

Carboxymethyl Cellulose CMC powder for thickening agent materials .

Power Cord Strain and Twist Tester

ZLT-LN1. To determine the strain and twisting of the supply cord where it enters the appliance, in accordance with IEC60335-1 clause 25.15.

Styrene-butadiene Rubber Liquid SBR

Styrene-butadiene rubber liquid for battery anode binder.

Cold Bend Test Apparatus

ZLT-SDJ1. To determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60811-1-4 clause 8.1 figure 1

Super Capacitor Activated Carbon for Battery

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Thermal Deformation Test Device

ZLT-JR1. To determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.

CR2032 Coin Cell Battery Cases for Battery R&D

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Tinsel Cord Snatch Test Device

ZLT-ST2, to determine the impactive effect of the tinsel cord,in accordance with IEC 60227-2 clause 3.3 and IEC 60227-1 clause 5.6.3.4.

High Purity Copper Foam Sheet Material

High purity copper metal foam sheet for battery electrical materials.

Three Pulley And Two Pulley Cable Flexing Testing Machine

ZLT-QL1A. adding three pulley flexing test, have a modified carrier C, For checking the mechanical durability of flexible cords and cables by bending them back and forth, according to IEC60245-2/1998-04 figure 1, IEC 60245-2 figure 6 and clause 3.5 table 3. IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11

Aluminum Foil Price Per kg Supplier for Lithium Ion Battery Materials

10 Mircon Copper Foil Roll Price for Lithium ion Battery Materials

Copper foil roll for lithium battery materials.

Flexible Cord Abrupt Pull Test Apparatus

Conform to UL 817 clause 99 and figure 99.1 -99.2, for abrupt pull test, rotation test,drop weight test and carrying current test of grouding conductor :0.1-50A

Lithium ion Battery Separator Film

Lift Cables Flexing Tester

To determine the mechanical strength of lift cables,according to IEC60227-6 clause 4.4.1 and figure 3.

Socket-outlet Torque Balance

ZLT-LJ2, for measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2.

Battery Electrolyte Llipf6 for Lithium ion Battery

Flexing Test Swivel Machine

ZLT-DW2, for continuous bending tests by swivelling movements to check 6 cables simultaneously, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.

High Purity Lithium Chips, Lithium Metal Foil, Lithium Metal Ingot Materials for Lithium Battery Research

Equipment to Load the Samples with Current

ZLT-HZ1, installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.

6mm Thickness Open Cell Aluminum Metal Foam Suppliers

Cord Anchorage Torque Test Device

ZLT-LJ3, this device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non detachable flexible cords according to IEC60884 1 clause 23.2(table 18),VDE0620 clause23.2(table18),IEC60335 1 table12 clause 25.15.

Titanium Foam Sheets Materials Price

Ball Pressure Test Device

ZLT-QY1, to determine the dimensional stability of parts consisting of non-ceramic, non metallic insulating materials according to IEC60695 10 2, IEC60335 1 clause 30.1, IEC60598 1 clause 13.2.1 Fig.10, IEC60884 Fig.37, IEC60320 Fig. 23, VDE 0620 Fig.19, IEC60669 1 Fig.25, IEC60670 Fig.5, IEC60967 Fig. 19, etc

304 Stainless Steel 18650 Battery Case for Battery Lab Research

18650 battery case for battery lab research.

Tumbling Barrel Test Machine

ZLT-GT1, is to determine the mechanical strength of lamp or electrical appliances or electrical components in accordance with IEC60598 figure 25 and VDE0620 Bild 27.

Aluminum Laminated Film Lithium Polymer Case/Pouch Case With Customized Size

Cord Anchorage Testing Machine

ZLT-DY1, for testing cable connections with intermittent tensile load in according to IEC60884/2006 figure 20, VDE0620 Bild 20.

Nickel Tabs for Lithium Battery Making

Heat Compression Test Apparatus

ZLT-RS1, to determine the verification of resistance of accessories and surface type mounting at a temperature of (80±2)℃, according to IEC 60884 1 figure 38 and clause 25.4, VDE 0620 figure 37, BS 1363 figure 23.

High Quality Porous Nickel Foam Sheet Materials for Battery

Verify the Fixation of Pins in the Body of the Plug Test Device

ZLT-CX1, to determine the fixation of pins in the body of the plug, conform to IEC60884 1 figure 30.

Pure Nickel Strip for Battery Spot Welding

Socket Plug Strength Test Device

ZLT-CB1, for verification of the maximum and minimum withdrawal force of the socket and plug, according to IEC60884 1 figure 18 and 19, VDE0620-2005 bild 19.

Carbon Coated Aluminium Foil Supplier for Lithium Battery