Indentation Test Device

ZLT-HP1, for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10.

Porous Open Cell Aluminum Metal Foam Sheet Manufacturer

Clamping Device Test Machine

ZLT-DSG2, to test the reliability of clamping devices to hold flexible electrical conductors, according to IEC60884 1 figure 11 and clause 12.2.5, VDE0620

Lithium Battery Pure 8 Micron Copper Foil

Copper foil for lithium battery electric materials.

Flexion Test Apparatus

ZLT-DSG3, similar to ZLT DSG2, but according to IEC60947 figure 1 and clause 8.2.4.3, table 5

CR2016 Case with One or Two Sides Kapton Windows for In-situ

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Lateral Strain Test Device

ZLT-HY1, to determine the lateral strain imposed by equipment likely to be introduced into the socket outlets, which having ratings up to and including 16 A and 250 V, in according to IEC60884-1 figure 13 and clause 13.14, VDE0620,

21700 Cylinder Cell Cases for Labratorary Research.

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Compression Test Device

ZLT-YS1, to determine the contact pressure of side earthing contacts of socket outlets, the temperature of the pressure plate, of the base and of the specimens being (23±2)℃ and the force applied being 300 N, in accordance with IEC60884 1 figure 8, VDE0620 figure 8.

Aluminum and Nickel Tab for Battery

Aluminum pole ear and nickel (with ear glue /PP glue).

Plug Pin Abrasion Testing Machine

ZLT-CTZ1, to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to IEC60884 1 Fig 28, EN 50075 Fig 9, VDE0620 bile 29 and BS1363 Fig 9.

CR2032 Al-Clad Coin Cell Cases Can with Aluminum coating

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Low Temperature Ram Impact Test Apparatus

ZLT-DCJ1, to determine the mechanical strength of insulated cords, cables, couplers, plug pin insulating sleeves and enclosures in the cold, according to IEC60884 1 figure 27 and 42, IEC60811-1-4 figure 2, VDE0620 figure 28 and 41

High Thermal Conductive Graphite Sheet Electrode

Graphite sheet is one kind of material can be applied in a large field.

Non Solid Pins Test Device

ZLT-CXY1, to determine the mechanical strength of non solid pins, accordance with IEC80884 1 figure14,VDE 0620 Bild 12.

Pouch Polymer Battery Clamp and Battery Clip for Lithium Battery Tester Accessories

Graphite sheet  is one kind of material can be applied in a large field.

Multiple Portable Socket outlets Mechanical Strength Test Device

ZLT-MS, to determine the mechanical strength test on multiple portable socket outlets, in according to IEC60884 1 figure 29,

Conductive Graphene Paste for Lithium Battery， supercapacitor,nickel hydrogen battery

Graphite sheet  is one kind of material can be applied in a large field.

Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus

ZLT-AH1, to determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,

LITFSI Battery Electrolyte for Lithium Battery Raw materials

Graphite sheet  is one kind of material can be applied in a large field.

Etched aluminum foil Use for Electrolytic Capacitor Anode 20mm

 Manual Coin Cell Electrode Table Hydraulic Press Machine.

Shrouds Pressure Test Apparatus

ZLT-SP1, for testing the deformation and behavior by subjecting to a pressure, according to IEC 60238 figure 9, IEC 60320 1 figure 20, EN 60238 figure 9

Low Price Acrylic Adhesive Tape Glue for Sale

Enable single handed operation pipette filter tip. 

Pulling Test Apparatus

ZLT-SP2, to determine the mechanical strength of the connector, accordance with IEC60320 1 figure 19 and clause 23.3,

Polyimide Film Tape for Lithium Battery Silicone Tape

Enable single handed operation pipette filter tip. 

Test Cylinder

ZLT-GP, to determine the fixed structure reliability of surface type socket outlets, in accordance with IEC60884 1 clause 24.3

PVDF Coated Battery Separator

Enable single handed operation pipette filter tip. 

Plug and Socket Endurance Testing Machine

ZLT-CS1, to test plugs and socket-outlets, cable couplers and appliance couplers, according to IEC 60884-1 figure 16 and clause 20.

New Type Coin Cell Cases Gold Coated CR2032

A full set of coin cell cases generally include cathode cases, anode cases, spacers and springs.

Plug and Socket Endurance Lab Test Equipment

ZLT-CS2, according to IEC 60884-1 figure 16 and clause 20. 2 working station for 2 specimen simultaneously.

Plug and Socket Endurance Tester

ZLT-CS3, according to IEC 60884-1 figure 16 and clause 20. 3 working station for 3 specimen simultaneously.

Vacuum Glove Box Price for Lithium Battery Laboratory Research

Laboratory  battery roll press machine for battery.

50mm-120mm Lab Use Agate Mortar with Pestle

This machine is a automatic roll to roll press machine for battery electrode.

Switch Life Test Machine

ZLT-SW, to test switches having rated resistive-load currents up to 16 A,in accordance with IEC60669-1 clause 18 and 19

Single Head li ion battery Electrolyte Filling Machine

This machine is a automatic roll to roll press machine for battery electrode.

IEC60312 figure 16 Tumbling Barrel Safety Test Equipment

ZLT-GT4, similar to ZLT-GT2, but of larger dimensions for testing of accessories for vacuum cleaners, according to IEC60312 figure 16.

Stainless Steel Purification System Laboratory Vacuum Glove Box

 Manual Coin Cell Electrode Table Hydraulic Press Machine.

Drop And Fall Tester

ZLT-GT3, similar to ZLT-GT2, but according to BS1363 figure 20.

Lab Deionized Water System Euqipment

Enable single handed operation pipette filter tip. 

Tumbling Barrel Lab Test Apparatus

ZLT-GT2, is to determine the mechanical strength of electrical appliances or electrical components in accordance with IEC60068-2-32 Amendment 2