Topstar Technology Industrial Co., Ltd.-sfyh.com

Finisar FTLX1672M3BNL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672M3BNL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDH STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BNL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

Finisar FTLX1672M3BTL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672M3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDM STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BTL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

Finisar FTLX1772M3BCL 10G 40km 1310nm SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with SFF-8431 and SFF-8432, and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x Fibre Channel and 6.144G/9.83 CPRI. These transceivers have higher optical transmit power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1 transceivers. They support an optical link budget of 17dB to compensate for the higher fiber attenuation loss at 1310nm over 40km of G.652 single mode fiber.

Finisar FTLX1871D3BxL 10G-ZR 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX1871D3BxL optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Finisar’s FTLX1871D3BNL transceivers are RoHS compliant as per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FTLX1871M3BxL 10G-ZR/OC-192 LR-2 Multirate 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1871M3BxL are Enhanced Small Form Factor Pluggable SFP+ optical transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and G.959.1 P1L1-2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel. Finisar's FTLX1871M3BCL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant

Finisar FTLX2672D3xx 10Gb/s Bidirectional 30km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2672D327/FTLX2672D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 30km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX2672D327/FTLX2672D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per Directive 2011/65/EU.

Finisar FTLX2072D3xx 10Gb/s Bidirectional 10km Gen2 SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2072D327/FTLX2072D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX2072D327/FTLX2072D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per Directive 2011/65/EU.

Finisar FTLB8611P3xC 10Gb/s Bidirectional Dual-Band DWDM 20km Multi-Rate Tunable SFP+ (Bidi T-SFP+) Optical Transceiver

Form Factor: SFP+ Finisar’s FTLB8611P3CC / FTLB8611P3NC transceivers are Enhanced Small Form Factor Pluggable Tunable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 20km of G.652 single mode fiber. These transceivers are based on Finisar’s novel bidirectional dual-band DWDM architecture that fits one pair of downstream and upstream channels into a 100GHz band.

Finisar FTLX2471DC0xx 10GBASE-LR 10km CWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2471DC0xx 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in CWDM 10km Single Mode fiber links. They are compliant with SFF-8431, SFF-8432 and compatible with IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.

Finisar FTLF8526W4BTL 6G CPRI Wireless 300m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8526W4BTL SFP+ transceivers are designed for use in wireless application of links up to 6.1 Gb/s data rate over multimode fiber. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF1426P2BTL 6G CPRI Wireless 15km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1426P2BTL SFP+ transceivers are designed for use in Wireless basestation links up to 15 km at 4.915 and 6.144 Gb/s data rates for CPRI, OBSAI, LTE, or other Wireless applications. They are compliant with SFF-8472 Rev 10.2, CPRI Rev 4.1, OBSAI Rev V4.1, and compatible with SFF-8432, 1.228 and 2.457 Gb/s data rates for CPRI, and applicable portions of FC-PI-4 Rev 8.00 and SFF-8431 Rev 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FCLF852xP2BTL 1000BASE-T 100m Gen2 RJ-45 Copper SFP Optical Transceiver

Form Factor: SFP Finisar's FCLF8520P2BTL, FCLF8521P2BTL and FCLF8522P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

Finisar FTLF8519P3BNL 1000BASE-SX and 2G Fibre Channel (2GFC) 500m Extended Temperature SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF8519P3BNL Small Form Factor Pluggable (SFP) optical transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 5.0. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The transceiver is RoHS-6 compliant per Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF8519P3BTL 1000BASE-SX and 2G Fibre Channel (2GFC) 500m Industrial Temperature SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF8519P3BTL Small Form Factor Pluggable (SFP) optical transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 5.0. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The transceiver is RoHS-6 compliant per Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF1217P2xTL 100BASE-FX 2km SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1217P2xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They are simultaneously compatible with 100Base-FX, FDDI, ESCON, and Multimode SONET OC-3 SR-0 and OC-1 SR-0 standards as specified in IEEE Std 802.3, ISO/IEC 9314-3, Enterprise Systems Architecture/390, and ANSI T1.416.01-1999, respectively. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1318P3BTL 1000BASE-LX and 1G Fibre Channel (1GFC) 10km Industrial Temperature Gen3 SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1318P3BTL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3 and 1x Fibre Channel as defined in FC-PI-4 Rev. 8.00. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Application Note AN-2038 for more details. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1419P1xCL 1000BASE-EX and 2G Fibre Channel (2GFC) 55km SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1419P1xCL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3, and 1x and 2x Fibre Channel as defined in FC-PI 13.0. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1518P1BTL 1000BASE-ZX and 1G Fibre Channel (1GFC) 80km SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1518P1BTL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3 and 1x Fibre Channel as defined in FC-PI-4 Rev 8.00. They are RoHS compliant and leadfree per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1519P1xCL 1000BASE-ZX and 2G Fibre Channel (2GFC) 80km SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1519P1xCL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3, and 1x and 2x Fibre Channel as defined in FC-PI 13.0. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1519P1xNL 1000BASE-ZX and 2G Fibre Channel (2GFC) 80km SFP Extended Temperature Optical Transceiver

Form Factor: SFP Finisar's FTLF1519P1xNL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3, and 1x and 2x Fibre Channel as defined in FC-PI 13.0. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1619P1xCL 1000BASE-EZX and 2G Fibre Channel (2GFC) 110km SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF1619P1xCL Small Form Factor Pluggable (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3, and 1x and 2x Fibre Channel as defined in FC-PI-2 Rev. 10.0. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLC1152RGPL6-FB 100G QSFP28 CWDM4 Lite 1270/1290/1310/1330nm 500m LC 0-70 Optical Transceiver

Finisar FTCD1333E1PCL 400GBASE-FR8 QSFP-DD Optical Transceiver

Form Factor: QSFP-DD Finisar’s FTCD1333E1PCL FR8 QSFP-DD transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the QSFP-DD MSA, QSFP28 MSA, IEEE P802.3bs and portions of IEEE P802.3bm. Digital diagnostic functions are available via the I2C interface, as specified by the MSA and Finisar Application Note AN-20xx.

Original Finisar QSFP 40G Transceiver Module FTL410QE2C fiber optic equipment

Brand Name:Finisar Model Number:FTL410QE2C Type:QSFP+ Power supply:3.3v Condition:Original and brand new Warranty:1 year Wavelength:850nm Rate:40G Distance:100M

Finisar FTLC1151RDPL 100GBASE-LR4 10km QSFP28 100G LR4 CWDM Module

Brand Name:Finisar Model Number:FTLC1151RDPL Type:QSFP28 Rate:100G Wavelength:LAN-WDM Distance:10km Media Type:Single-mode Module type:Pluggable Temperature:0°C~70°C Voltage supply:3.3v Warranty:1 year Guarantee:100% original

Finisar FTLF1436P3BCL 25G Ethernet RoHS Compliant Long Wavelength SFP28 Transceiver

Brand Name:Finisar Model Number:FTLF1436P3BCL Type:SFP+ Power supply:3.3v Condition:Original Warranty:1 year Wavelength:1310nm Rate:25G Distance:10KM

Original Finisar FTLF1324P2BTL MC 4.25g 1310nm 4km SFP Fiber Optic Module

Place of Origin:Malaysia Brand Name:Finisar Model Number:FTLF1324P2BTL-MC Condition:New Form Factor:SFP Data Rate:4.25G Wavelength:1310nm Distance:4km Connector:Dual LC Module Type:Pluggable Voltage supply:3.3v DDMI:Yes Warranty:1 year

Finisar FTLF1436P3BCL 25G LR SFP28 1310nm 10KM LC Optical Fiber Transceiver SFP28 Module

Place of Origin:Guangdong, China Brand Name:Finisar Model Number:FTLF1436P3BCL Rate:25Gb/s Wavelength:1310nm Distance:10KM Connector:LC/MPO Connector Diagnostics:digital Name:SFP28 LR Temperature:0°C~70°C Voltage supply:3.3v Application:Telecom Datacom Warranty:3-year

Finisar FTLC1121RDNL 100G CFP2 100G-LR4 10km CFP2 Optical Transceiver CFP Module

Description： Place of Origin:Guangdong, China Brand Name:Finisar Model Number:FTLF1436P3BCL Rate:25Gb/s Wavelength:1310nm Distance:10KM Connector:LC/MPO Connector Diagnostics:digital Name:SFP28 LR Temperature:0°C~70°C Voltage supply:3.3v Application:Telecom Datacom Warranty:3-year

Finisar FTL410QE2C 40G QSFP28 100GBASE-SR4 100M Gen2 QSFP28 850NM Transceiver Module

Brand Name:Finisar Model Number:Finisar FTL410QE2C Wavelength:850nm Distance:100M Data Rate:100G Type:100G QSFP28 Connector:Duplex LC Temperature:0°-70° Warranty:1-year Application:switch, router Brand:Finisar Fiber Type:SMF

Finisar FTCD1333E1PCL 400GBASE-FR8 2km QSFP-DD Optical Transceiver

Finisar’s FTCD1333E1PCL FR8 QSFP-DD transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the QSFP-DD MSA, QSFP28 MSA, IEEE P802.3bs and portions of IEEE P802.3bm. Digital diagnostic functions are available via the I2C interface, as specified by the MSA and Finisar Application Note AN-20xx.

Finisar FTLC9555SEPM 100G Ethernet, OTU4 & 128G Fibre Channel Multirate 100m Gen2 QSFP28 Optical Transceiver

Product Feature: Hot-pluggable QSFP28 form factor Supports 103.1 Gb/s to 112.2Gb/s aggregate bit rates Power dissipation <2.5W RoHS compliant Single 3.3V power supply Maximum link length of 100m on OM4 Multimode Fiber (MMF) 4x28Gb/s 850nm VCSEL-based transmitter 4x25G electrical interface Single MPO12 receptacle I2C management interface

Finisar FTLC9555FEPM 128G Fibre Channel Parallel 100m MMF Gen2 QSFP28 Optical Transceiver

Product Feature: Hot-pluggable QSFP28 form factor Supports up to 112.2Gb/s aggregate bit rate Power dissipation <2.5W RoHS compliant Commercial case temperature range of 0°C to 70°C Single 3.3V power supply Maximum link length of 100m on OM4 Multimode Fiber (MMF) 4x28Gb/s 850nm VCSEL-based transmitter 4x25G electrical interface Single MPO12 receptacle I2C management interface