Topstar Technology Industrial Co., Ltd.-sfyh.com

Finisar FTLX3871MCCxx 10G Multi-Protocol Fixed Channel DWDM 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX3871MCCxx optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431 DS100S1-2Dz(C) and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel over 80km fiber. Finisar’s FTLX3871MCCxx transceivers use internal retimers (clock and data recovery or CDR) IC’s for both the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements, and they can be used to set the electrical interface XFI-compliant.

JDSU SFP+ PLRXPL-VE-SH4-2E SPP-10E-SR-CDFB Finisar FTLX8571D3BNL-E5 850nm 10g SFP module

Product Description： Brand:Finisar Model Number:FTLX8574D3BCL Wavelength:850nm Rate:10.3G Distance:300M Connector:Dual LC Connector Type:SFP+ Temperature:0°C~70°C Media Type:dual mode Voltage supply:3.3v Module type:Pluggable

Original Finisar FTLF1621P1xCL 1550nm 80km ZR 2G Optical Modules

Finisar FTLF1621P1xCL (80km ZR 2G)Small Form Factor Pluggable (SFP) optical transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They comply with SONET OC-48 LR-2 (SDH STM L-16.2) standards, Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC-PI 13.0. They(2G Optical Modules) are compatible with SONET OC-12 SR and SONET OC-3 standards. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Original Finisar FWLF1523P1x51 1550nm 80km ZX 155 MB SFP modules

Finisar FWLF1523P1x51 Small Form Factor Pluggable (SFP) transceivers provide a reliable solution for 1511nm, point-to-point, 155Mb/s Optical Supervisory Channel (OSC) applications, outside the band of the transmitted signal. 1550nm 80km ZX 155 MB Modules are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), as well as with SONET and SDH standards at OC-3 LR-2/STM L-1.2 and Fast Ethernet applications. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. 155M ZX SFP Modules are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038.

Original Finisar FWLF15197Dxx 80km ZX 1G CWDM Optical Modules

Finisar's FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) optical transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment.The 1G CWDM Optical Modules are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 80km CWDM Optical Modules comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Original Finisar FWLF16197Dxx 100km 1.25G CWDM Optical Transceiver

Finisar FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) 1.25G CWDM Optical Transceiver is designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment. The 100km 1.25G CWDM are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 100km CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Original Finisar FWLF15217Dxx 2G 1550nm CWDM 50km Mini-GBIC SFP Transceiver Module

Finisar FWLF15217Dxx CWDM 50km 2G SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment. Finisar 50km 2G CWDM are available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, the transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FWLF1621P2Txx 1550nm 2.67G CWDM 50km High Density CWDM Transceivers Gigabit Ethernet and Fibre Channel Modules

Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet Modules and Fibre Channel Modules networking equipment in environments where temperatures are not controlled. CWDM 50km 2.67G SFP is available in eight different CWDM wavelengths and complies with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, High Density CWDM Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FWLF1621P2Txx ZX CWDM SFP 80km 2.67G Gigabit Ethernet Optical Transceivers

Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) ZX CWDM SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment in environments where temperatures are not controlled. CWDM 80km 2.67G SFP is available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition,1550nm 2.67G CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FWLF1524P2Vxx 1550NM CWDM EX SFP High Density Optical Transceivers

Finisar FWLF1524P2Vxx Small Form Factor Pluggable (SFP) SFP EX Optical Transceivers is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). CWDM EX SFP is designed for operation in Metro Access Rings and Point-to-Point networks using Fibre Channel and Gigabit Ethernet networking equipment by selecting the appropriate line rate. High Density CWDM Transceivers is available in eight different CWDM wavelengths and is RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FWLF1625P2Lxx CWDM ZX SFP 1550NM CWDM ZX SFP Optical Transceivers

Finisar FWLF1625P2Lxx Small Form Factor Pluggable CWDM ZX SFP transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) SFP ZX Optical Transceivers is designed for operation in Metro Acess Rings and Point-to-Point networks using Fibre Channel, Gigabit Ethernet, or SONET networking equipment by selecting the appropriate line rate. The FWLF1625P2yxx is available in eight different CWDM wavelengths. 1550NM CWDM ZX SFP optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF8526W4BTL 6G 850NM Wireless 300m SFP+ Optical Transceiver

Finisar FTLF8526W4BTL is 6G 850 SFP+, with 1 year warranty. Check datasheet, price and details on www.opticalmodulemanufacturers.com.

Finisar FTLF1428P3BNV 8G SFP 10km SFP+ Fiber Transceiver Module

Finisar FTLF1428P3BNV is 8G 1310nm 10KM SFP+, with 1 year warranty. Check datasheet, price and details on www.opticalmodulemanufacturers.com.

Finisar FWLF1632xx Fixed Channel DWDM 120km SFP Optical Transceiver

Finisar FWLF1632xx optical transceivers are Fixed Channel DWDM SFP designed for use in Dense Wavelength-Division Multiplexing (DWDM) links, for up to 120km link lengths and up to 2.7G bit rates. DWDM 120km SFP transceivers are designed for service providers deploying SONET and DWDM networking equipment in metropolitan access and core networks. They are also compatible to Gigabit Ethernet data rate. The 120km DWDM SFP transceivers are RoHS 6 compliant. Basic digital diagnostic features are implemented as described in Finisar Application Note AN-2030. Enhanced diagnostic features are available as described in the DWDM SFP MSA.

Finisar FWLF1631Rxx Fixed Channel DWDM 160km SFP Optical Modules

Finisar FWLF1631Rxx optical transceivers are Fixed Channel DWDM SFP designed for use in Dense Wavelength-Division Multiplexing (DWDM) links, for up to 120km link lengths and up to 2.7G bit rates. DWDM 160km SFP transceivers are designed for service providers deploying SONET and DWDM networking equipment in metropolitan access and core networks. They are also compatible to Gigabit Ethernet data rate. The 160km DWDM SFP transceivers are RoHS 6 compliant. Basic digital diagnostic features are implemented as described in Finisar Application Note AN-2030. Enhanced diagnostic features are available as described in the DWDM SFP MSA.

Finisar FTLF8528P3BCV 8G Fibre Channel (8GFC) SFP+ 150m SFP Transceiver Module

Finisar’s FTLF8528P3BxV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00a and SFF-8472 Rev 11.0c, and compatible with SFF-8432b and applicable portions of SFF-8431 Rev. 4.1d. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FWLF1634RLxx C-Band ZR DWDM SFP 80km Optical Modules

Finisar FWLF1634RLxx (DWDM) optical transceivers offer DWDM transport with dramatically lower power and cost in a standard pluggable Small Form Factor Pluggable (SFP) package. C-Band DWDM SFP is designed expressly for service providers deploying DWDM networking equipment in metropolitan access and core networks. Basic digital diagnostic features for the ZR DWDM SFP are implemented as described in Finisar Application Note AN-2030. Enhanced diagnostic features are available as described in the DWDM SFP MSA.

Finisar FTEN2x15P1xUN 1G EPON ONU EPON SFP Modules

Finisar optical transceivers with a built-in 1G EPON ONU. 1G EPON SFP Modules comply with IEEE802.3ah EPON standard and support CTC OAM. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. Finisar's EPON SFP sticks are compatible with the Small Form Factor Multi-Sourcing Agreement (MSA) and interoperable with standard-compliant EPON OLTs.

Finisar FTLF8528P3BNV 8Gb SFP 850nm Ir Laser 150m

Finisar’s FTLF8528P3BxV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00a and SFF-8472 Rev 11.0c, and compatible with SFF-8432b and applicable portions of SFF-8431 Rev. 4.1d. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTEN2x15P1xUN-BC 1.25G EPON ONU SFP Modules

Finisar EPON sticks (FTEN2115P1NUN-BC and FTEN2215P1CUN-BC) are 1G EPON SFP Modules with a built-in 1G EPON ONU. They comply with IEEE802.3ah EPON standard and support CTC OAM. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. Finisar's FTEN2x15P1xUN-BC EPON SFP sticks are compatible with the Small Form Factor Multi-Sourcing Agreement (MSA) and interoperable with standard-compliant EPON OLTs.

Finisar FTEN2x17P1xUN 1.25G EPON SFP Transceivers 1.25G EPON ONU

Finisar's EPON sticks (FTEN2117P1NUN and FTEN2217P1CUN) are EPON SFP Transceivers with a built-in 1G EPON ONU. They comply with IEEE802.3ah EPON standard and support CTC OAM. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. 1.25G EPON ONUs are compatible with the Small Form Factor Multi-Sourcing Agreement (MSA) and interoperable with standard-compliant EPON OLTs.

Finisar FTEN2x17P1xUN-BC EPON SFP Modules 1.25G EPON SFP Transceivers

Finisar EPON sticks (EPON SFP Modules) are SFP optical transceivers with a built-in 1G EPON ONU. They comply with IEEE802.3ah EPON standard and support CTC OAM. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. Finisar's FTEN2x17P1xUN-BC EPON sticks are compatible with the Small Form Factor Multi-Sourcing Agreement (MSA) and interoperable with standard-compliant EPON OLTs.

Finisar FTLF8524P3BNL 3.7G MM SFP Transceiver for 1000BASE-SX Ethernet

Finisar FTLF8524P3BNL MM SFP Transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The MM SFP is RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF8524P2xNL 4.25G SFP MM Transceivers Modules

Finisar FTLF8524P2xNL Small Form Factor (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). 4.25G SFP Transceivers are compatible with Fibre Channel FC-PI-2 Rev. 7.0. Rate selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.3. 4.25G SFP Modules are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. Digital diagnostics functions are available via the 2-wire serial bus specified in the 4.25G MM SFP MSA.

Finisar FTLF8524P2xNV 4G 550m Optical Transceiver SFP Modules

Finisar FTLF8524P2xNV 4G Optical Transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They are compatible with Fibre Channel FC-PI-2 Rev. 7.0. Rate selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.3 with 4G SFP 550m The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

Finisar FTLF1324P2xTL 4G Single-mode SFP 4km Optical Transceivers

Finisar FTLF1324P2xTL 4G single-mode SFP is compatible with the SFP Multi-Sourcing Agreement (MSA). They are compatible with Fibre Channel FC-PI-2 Rev. 7.0. Rate selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.3 with 4G SFP 4km The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.