universal testing machine tensile test-sfyh.com

Universal Testing Machine for Footwear (Dual Column) GT-K01

Universal Testing Machine (Dual Column) For Shoes is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes ,rubber, plastic, leather, metal, nylon line, fabric, paper

Shoes Rubber Materials Universal Testing Machine GT-K01

Universal Testing Machine (Dual Column) For Shoes is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper

Single Column ASTM Tensile Test Machine GT-UA03

This Tensile Test Machine is applied to the test of mechanical property like tension, compression, bending, shear , tear, peel of materials such as rubber, plastic, aluminum tube, composite materials, waterproof materials, prevention material, yarn, fiber, wire and cable, paper, spring, wood, packaging materials, adhesive tape, etc.

IEC 60529 IPX3 IPX4 Spray Nozzle

ZLT-JL1. For checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 3 “Protected against Spraying Water” and 4 “Protected against Splashing Water”, in accordance with IEC60529 figure 5, IEC60335 clause 15.1.1, IEC60598.

IEC 60529 IPX5 & IPX6 Water Jet Nozzle

ZLT-JL2. For checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 5 “Protected against water jets” or 6 “Protected against powerful water jets”, in accordance with IEC60529 figure 6, IEC60335-1 clause 15.1.1, EN60950, IEC60598 figure 8.

IEC 60529 Drip Box

ZLT-DB. For checking the protection against water to prove the degrees of protection with the second characteristic numerals 1 “Protection against water drops” and 2 “Protection of a specimen in a position of tilt against water drops” According to IEC60529 Fig 3 Table 8, IEC60335-1 clause 15.1.1, IEC60947-1 Annex C.14.1, IEC60598-1 clause 9.2.3

IEC 60529 Oscillating Tubes Device

ZLT-DP. For checking the protection against water with spray nozzle of 0,4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 “Protection against Spraying Water” resp. “Protection against splashing Water”. According to IEC60529 figure 4, IEC60598 clause 9.2.5, IEC60947.

IEC 60529 Turntable Test Device

ZLT-TD. To carry the specimens when determining the protection against water, according to IEC60529 figure 4, IEC 60335-1 clause 15.1.1, IEC60598 clause 9.2.4 and 9.2.5.

IEC 60529 IPX Water Test Whole System

ZLT-IPX1-6. For checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 1 to 6, in according to IEC60529 IPX1-6.

Creepage Distances Gauges

ZLT-CK. For gauging the creepage and clearance distances in dead state between parts under voltage in the operating conditions as well as between touchable metal pieces and parts under voltage in the operating conditions. e. g. in installation material, switchgears, plugs, socket-outlets and electric appliances

Mandrel Test Apparatus

ZLT-BM1. The Mandrel is used to test non-separable thin sheet material. Constructional requirements with regard to Protection against Electric Shock for IEC61558-1 Figure6, IEC60065 Figure14 16 and IEC60950 Annex AA.

Dielectric Strength Test Instrument

ZLT-KQ1. To test the surge strength according to IEC60065 figure 6 and UL1310 clause 40.2,

75 and 20 Pounds Force Test Instrument

ZLT-F75P. For resistance to crushing on direct plug-in units, according to UL1310-2005 clause 46.5.1,UL1310-2005 clause 46.4.2.

Test Chain

ZLT-P. To check the short-circuit protection,according to IEC50598 clause 4.26.3.

Expanded Metal Spacer

ZLT-S1. according to IEC 60598 clause 9.2, to tests for ingress of dust, solid objects and moisture,

Crush Test Flat Surface

According to IEC 62368:4.8.4.6, a flat surface measuring approximately 100 mm by 250 mm for crush test.

Dust Test Chamber

In accordance with IEC60529/2001 figure 2 and IEC 60598 etc,

Textile Tensile Testing Machine M001

Textile Tensile Testing Machine is typically found in applications and industries, such as rubber, metal, composites,fabrics, paper, aviation, automotive, biomedical, elastomers, packaging, electrician, vehicle, etc. Wildly used for R & D and production.

Single Column Tensile Testing Machine M002A

Single Column Tensile Testing Machine is most commonly used for quality control, inspection, physical test, mechanics research, material development and production environment.