Water treatment is divided into waste-water treatment, urban water supply treatment, drinking water treatment, pure water treatment, aquaculture water treatment;There are two methods of water treatment, the first is to put the UVC Sterilization Lamp in the water sterilization, the second is to put the sterilization lamp in the casing, because the flow rate of water is too fast, sterilization lamp time sometimes less than 1 second, so will require the use of high power sterilization lamp or choose a longer UV lamp to sterilization.
Parameter of Handhled UVC Light Meter :
Weight : 194g
Dimension : L148mm*H76mm*W26mm
Display : 240*160 touch screen LED
Battery : four AAA Alkaline Dry Cell
Probe Connection : push - pull self - locking (clasp type) connector
UVC-WP UV Intensity Sensor Probe is one of the 9 probes of LS125 ultraviolet irradiance meter. It is a probe specially developed for water treatment high-power sterilization lamp. The response wavelength of the probe is 230nm-280nm, with waterproof function, waterproof depth up to 1 meter, and can detect the intensity and energy of the sterilization lamp.
Parameter of UVC UV Sensor Probe:
Spectral Response
|
230nm-280nm, λp=254nm
|
Power Measurement Range
|
0-200000μW/cm2
|
Power Resolution
|
0.1μW/cm2
|
Energy Measurement Range
|
0 - 9999999μJ/cm2
|
Write Time
|
0 - 99999S
|
Measurement Accuracy
|
±10 %
|
Sampling Rate
|
6 times / s
|
Units
|
μW/cm2 (default),mW/cm2,W/m2
|
Test the Diameter of Light Hole
|
¢10mm
|
Probe Size
|
diameter 50mm * thickness 20mm
|
The Depth of Waterproof
|
1m
|
Advantages of Portable UV Intensity Meter Caliibration :
1. Large range UV Intensity Meter Caliibration, the maximum power can be measured to 200000 W/cm2.
2. The instrument can measure the energy value and power value at the same time.
3. It has rich statistical functions, such as real time value, maximum value, minimum value, average value, measurement duration and energy value.
4. Can switch 3 measurement units, respectively W/cm2, mW/cm2, W/m2 data conversion between different units without manual calculation.
5. With waterproof function, waterproof depth up to 1 m.
Connection of UV Intensity Meter Host and Probe
1.Insert probe : align the probe interface and rotate to the appropriate position to insert the probe
2.Pull out the probe : pinch the pull button with fingers and pull it up to pull out
Packing Details of Best Waterproof UVC Meter :
1.Plastic engineering box
2.Instructions
3.Ultraviolet radiation meter host
4.Certification of compliance / warranty card
2AAA battery test probes (subject to the actual purchase quantity)
Intelligent Statistics of Accumulated UVC Light Meter :
Enrich statistics functions : real time value, maximum value, minimum value, average value, measurement time, energy value display at the same time.
Attention : when using UV Sensor Probe, do not put the main engine into water !