Description
Water based water and oil-repellent coating PF-202 an aqueous emulsion and containing no flammable solvents, the new C6-fluorocarbon shows full performance regarding water, soil and oil repellency after drying at ambient temperature. Suitable for fiber types, laminates, leather and hard surfaces.
Type
-Textile self-cleaning nano coating
Key features
-Easy-to-clean effects
-Free of PFOA and PFOS
-Fabric color and handle are not affected
-Outstanding and durable oil, soil and water repellency
-No silicone-based and metalorganic compounds contained
-Washing and cleaning agent resistance up to 15~20 washes
-Suitable for all fiber types, laminates, leather and hard surfaces
-Full performance level after drying at room temperature, no heat treatment required
Typical properties
Appearance： Yellowish milky liquid
pH (50% in water)： 3.0-5.0
Density (g/cm3 at 20℃)： 1.05±0.03
Viscosity (mPa·s at 20℃)： 5-30
Dry time (h)： 24
Consumption (ml/m²)： 30-300 (depending on the substrate)
Application
-Fabric, Textile, Cotton, Wool, Polyester fabric, Suede/leather corduroy etc.
Surface Preparation: Textile must be completely free of all contaminants including detergents and fabric softeners. To rid of contaminants, use hot water on a spin cycle. Textile must be completely dry before coating.
Application: Completely saturate fabric by spray or dip application.
Cure Time: About 24 hours. Cure can be accelerated with heat up to 150℃.
Up to 20 washes: You have to add crosslinker and cure it under 150℃ more than 5 mins.
Note: Tested up to 20 washes in ideal laboratory conditions. Recommended care is washing in hot water with no detergents or fabric softeners to keep the hydrophobic effect. If a detergent has been used, it is important to rinse fabric with hot water to restore performance of coating.
Storage and handling
Available in 5L/barrel or 25L/barrel
Store products in tightly closed original containers at 5-35℃
Shelf life: 18-24 months from delivery date
According to non-dangerous goods transport
