Whole Surrounding Raycus SourceCNC Sheet Metal Fiber Laser Cutting Machine
-
Laser Air Conditioning design, longer life.
-
Operation platform use suspension light and stainless steel covered edge.
-
2 platform, change just need 8'
-
Machine bed with 600℃ high temperature heat treatment,24 hours with furnace cooling, ensure machine out of share.
-
Whole Surrounding meet the national environmental protection standards.
Nodular cast iron machine body, ductile cast iron casting structure, good impact toughness, fatigue strength and vibration damping. After the overall natural elimination of internal stress, a precision machining process was completed with a large scale 5 axis machining center.With high rigidity, the precision and stability of machine tool in high speed operation are guaranteed. Many customer will choose cast iron body fiber laser cutting machine.
Cast iron bed can be machined to higher accuracy
Cast iron bed has better stability
Cast iron of cast iron bed because of its material properties cast iron bed strength, stiffness are very high, small plastic deformation, not easy to produce deformation. The precision of casting bed is guaranteed for about 15-20 years.
Cast iron bed has lower thermal sensitivity
Due to the high carbon content of cast iron, it is not easy to be subjected to thermal deformation. Laser cutting, as a kind of hot processing, produces more heat. The low thermal sensitivity of cast iron bed makes it not easy to affect the precision of machine tool due to thermal deformation.
The casting bed is easy to form into oil film, which is convenient for customers to maintain.
Whole Cast Aluminum Beams, cantilever beam adopts the integral casting aluminum alloy, which ensure the high intensity and reduce the weight of the machine, reduced the Y axis of inertia in running at a highspeed, which guarantees the machine in motion have a very high acceleration.
When you choice sheet Metal Fiber Laser Cutting Machine must check if cast aluminum beams.
HADENCNC fiber laser cutting machineadopts domestic and international famous brand laser with higher photoelectric conversion efficiency (>30%), better beam quality, high anti-reflection capacity, At the same time, introducing the second generation of optical fiber transmission system ensure the cutting effect, especially on thick plate, more stable and precise.
Laser cutting machineuse Raycus fiber laser,the high-power multi mode continuous fiber laser series product is completely researched, developed and produced by Raycus itself. The R&D and production team of the company has great innovation capacity, so as to make this series meet customers’ demands to the greatest extent. Output optical system of the product applies reinforced armored output fiber, with output connector of QBH, better facilitating customers’ configuration. This series product, with dynamic work range of 10% - 100% of the rated output power, electro-optical conversion efficiency higher than 25% and the modulation working frequency up to 20kHz, can meet the demands of most application scenarios, with multiple control modes. Its good compatibility has been widely recognized by the market. The product has been well sold at home and abroad.
-
High electro-optical conversion efficiency
-
Customized output fiber length
-
QBH connector
-
Maintenance-free operation
-
Wide modulation frequency range
-
Small size, easy to install
