Company profile

Xiamen Blushing Sauce E-Commerce Co., Ltd. is a professional service provider in the field of industrial automation parts. We mainly provide PLC modules, DCS cards, ESD system cards, vibration monitoring system cards, turbine control system modules, gas generator components, and we have established close cooperative relations with many PLC and DCS product maintenance service providers. The company has established an e-commerce operation model, which reduces the intermediate links for consumers and provides consumers with high-quality products and satisfactory services. The company has a complete logistics supply system. We can buy directly from abroad and provide equipment and spare parts from different countries and manufacturers to solve your troubles.

All products

Schneider ATV312HU22N4 Motor Drives

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB IP920 3KDE175831L9200 IP920 Module housing (Cover for empty slots in TU921S, B and N).

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. IP920 Module housing (Cover for empty slots in TU921S, B and N). Email:sean@xmbse.cn

TRICONEX 9662-610 High-performance Digital Output Module

TRICONEX 9662-610 Termination Board in stock brand new competitive price excellent quality Email: sean@xmbse.cn

Schneider PC-E984-255 CPU Module

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB SA920B Power Supply 3BDH000601R1 SA920B Power Supply for 24 V DC, for redundant termination unit TU921B (TU16R-B) in S900 I/O

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. S900 I/O type B. For installation in hazardous area Zone 2. For connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. SA920B Power Supply for 24 V DC, for redundant termination unit TU921B (TU16R-B) in S900 I/O. Do not mix SA910B with SA920B for redundancy (observe Release Notes). Email:sean@xmbse.cn

ABB PM860AK01 The base plate of the PM858 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial po

Reliability and simple fault diagnosis procedures Modularity, allowing for step-by-step expansion IP20 Class protection without the requirement for enclosures The controller can be configured with 800xA control builder The controller has full EMC certification Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.) Email:sean@xmbse.cn

GE IC3650RDG2B1B IN STOCK

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB PM860AK01 The base plate of the PM862 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial po

• ISA Secure certified - Read more• Reliability and simple fault diagnosis procedures• Modularity, allowing for step-by-step expansion• IP20 Class protection without the requirement for enclosures• The controller can be configured with 800xA control builder• The controller has full EMC certification• Sectioned CEX-Bus using a pair of BC810 / BC820• Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)• Built-in redundant Ethernet Communication ports Email:sean@xmbse.cn

ABB SA920N Power Supply 3BDH000600R1 SA920N Power Supply for 24V DC, for redundant termination unit TU921N (TU16R) in S900 I/O

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. S900 I/O type N. For installation in safe (= non-hazardous) area. SA920N Power Supply for 24V DC, for redundant termination unit TU921N (TU16R) in S900 I/O. Do not mix SA910N with SA920N for redundancy (observe Release Notes). Email:sean@xmbse.cn

SCHNEIDER XSX3721101 Short Delivery Time

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB SA920S Power Supply 3BDH000602R1 SA920S Power Supply for 24 V DC, for redundant termination unit TU921S (TU16R-Ex) in S900 I/O

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. S900 I/O type S. For installation in hazardous area Zone 1. For connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. SA920S Power Supply for 24 V DC, for redundant termination unit TU921S (TU16R-Ex) in S900 I/O. Do not mix SA910S with SA920S for redundancy (observe Release Notes). Email:sean@xmbse.cn

ABB PM862K01 The base plate of the PM862 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial por

• ISA Secure certified - Read more• Reliability and simple fault diagnosis procedures• Modularity, allowing for step-by-step expansion• IP20 Class protection without the requirement for enclosures• The controller can be configured with 800xA control builder• The controller has full EMC certification• Sectioned CEX-Bus using a pair of BC810 / BC820• Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)• Built-in redundant Ethernet Communication ports Email:sean@xmbse.cn

ABB PM862K02 The base plate of the PM862 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial por

• ISA Secure certified - Read more• Reliability and simple fault diagnosis procedures• Modularity, allowing for step-by-step expansion• IP20 Class protection without the requirement for enclosures• The controller can be configured with 800xA control builder• The controller has full EMC certification• Sectioned CEX-Bus using a pair of BC810 / BC820• Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)• Built-in redundant Ethernet Communication ports Email:sean@xmbse.cn

ABB TU921B RTU (TU16R-B) 3KDE175112L9210 S900 I/O type B. For installation in hazardous area Zone 2. For connecting intrinsically safe field devices installed in Zone 2

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. S900 I/O type B. For installation in hazardous area Zone 2. For connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. TU921B Redundant Termination Unit (TU16R-B), for 16 I/O-modules, redundant communication and power (Delivery includes CD910). Email:sean@xmbse.cn

ABB PM863K02 The base plate of the PM863 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial por

ISA Secure certified - Read more AC 800M High up to SIL 3 certified using PM857/SM812, PM863/SM812, PM865/SM811 or PM867/SM812 Supports S800 I/O High Integrity (PM857, PM863, PM865, PM66A, PM867 and PM891) The controller can be configured with 800xA control builder The controller has full EMC certification TÜV Certified SIL 2 and SIL 3 Built-in redundant Ethernet Communication ports Email:sean@xmbse.cn

ABB TU921N RTU (TU16R) 3KDE175113L9210 TU921N Redundant Termination Unit (TU16R), for 16 I/O-modules

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units.S900 I/O type N. For installation in safe (= non-hazardous) area. TU921N Redundant Termination Unit (TU16R), for 16 I/O-modules, redundant communication and power (Delivery includes CD910). Email:sean@xmbse.cn

ABB PM866AK01 The base plate of the PM866 / PM866A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the

ISA Secure certified - Read more Reliability and simple fault diagnosis procedures Modularity, allowing for step-by-step expansion IP20 Class protection without the requirement for enclosures The controller can be configured with 800xA control builder The controller has full EMC certification Sectioned CEX-Bus using a pair of BC810 / BC820 Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.) Built-in redundant Ethernet Communication ports s Email:sean@xmbse.cn

ABB TU921S RTU (TU16R-Ex) 3KDE175111L9210 TU921S Redundant Termination Unit (TU16R-Ex), for 16 I/O-modules

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced. The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units. S900 I/O type S. For installation in hazardous area Zone 1. For connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. TU921S Redundant Termination Unit (TU16R-Ex), for 16 I/O-modules, redundant communication and power (Delivery includes CD910). Email:sean@xmbse.cn

Foxboro P0973BP In New Box

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB AIS810 3BSE078762R1 The AIS810 is an Analog Input Signal Conditioning Module (16-bit) supporting 2/4-wire devices and HART communications

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget.\r\nA Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The AIS810 is an Analog Input Signal Conditioning Module (16-bit) supporting 2/4-wire devices and HART communications. Email:sean@xmbse.cn

Foxboro FCM10EF P0916CP Communication Module

⭐brand new ⭐huge discount ⭐12 Months Warranty

FIDIA CUR10 The Best Price

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB AIS830 2PAA123605R1 The AIS830 is an Analog Input Signal Conditioning Module for temperature measurements via RTD/TC/mV

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The AIS830 is an Analog Input Signal Conditioning Module for temperature measurements via RTD/TC/mV. Email:sean@xmbse.cn

FOXBORO CP30B CONTROL PROCESSOR REV 0C

⭐brand new ⭐huge discount ⭐12 Months Warranty

Showing 14 to 21 of 21 (14 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.