China PLC,DCS and ESD Modules Supplier

Discover Exceptional Quality with ABB TB861V011 3BSE090352R1 in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V011 extends the Modulebus from one DIN-rail to another. Length 1.1 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD2-SH-Ex1.T.OP CHANNEL ISOLATED BARRIER,

1-CHANNEL ISOLATED BARRIER, 24 V DC SUPPLY (POWER RAIL), DRY CONTACT OR NAMUR INPUT, 2 PASSIVE TRANSISTOR OUTPUTS, USABLE AS SIGNAL SPLITTER (1 INPUT AND 2 OUTPUTS), REVERSIBLE MODE OF OPERATION, LINE FAULT DETECTION (LFD), HOUSING WIDTH 12.5 MM, UP TO SIL 2 (SC 3) ACC. TO IEC/EN 61508, HOUSING WIDTH: 12.5 MM, NUMBER OF CHANNELS: 1-CHANNEL, SAFETY INTEGRITY LEVEL (SIL): SIL 2, SYSTEMATIC CAPABILITY (SC): SC 3, RATED VOLTAGE: 19 ... 30 V DC, FIELD DEVICE: NAMUR SENSOR, FIELD DEVICE [2]: VOLT-FREE CONTACT Email:sean@xmbse.cn

ABB CI860 3BSE032444R1 The ABB FOUNDATION Fieldbus Linking Device LD800HSE/LD 800HSE EX acts as a gateway between the HSE subnet and up to four separate H1 links.

The CI860 can be used in redundant mode Up to twelve CI860 modules can be placed at one AC800 M also in redundant mode, and each of them can be connected to the same or to a separate FOUNDATION Fieldbus HSE subnet. The ABB FOUNDATION Fieldbus Linking Device LD800HSE/LD 800HSE EX acts as a gateway between the HSE subnet and up to four separate H1 links. Email:sean@xmbse.cn

ABB TB861V011 3BSE090352R1 - The Premier Choice for Advanced Industries in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V011 extends the Modulebus from one DIN-rail to another. Length 1.1 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KCD0-SD-EX1.1245 CHANNEL ISOLATED BARRIER,

1-CHANNEL ISOLATED BARRIER, 24 V DC SUPPLY (LOOP POWERED), CURRENT LIMIT 45 MA AT 12 V DC, HOUSING WIDTH 12.5 MM, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 12.5 MM, NUMBER OF CHANNELS: 1-CHANNEL, SAFETY INTEGRITY LEVEL (SIL): SIL 3, RATED VOLTAGE: LOOP POWERED, TYPE: FIELD DEVICE SUPPLY, FIELD DEVICE: 1 X VALVE, FIELD DEVICE [2]: 1 X AUDIBLE ALARM, FIELD DEVICE [3]: 1 X VISUAL ALARM, CURRENT: ≤ 45 MA, VOLTAGE: ≥ 12 V Email:sean@xmbse.cn

ABB CI862 Classic 3BUA000037R1 The AC 800M controller supports up to four CI862 CEX modules and 1,000 TRIO/Genius I/O points.

The AC 800M controller supports up to four CI862 CEX modules and 1,000 TRIO/Genius I/O points. TRIO supports CEX module redundancy. The CI862 unit also handles the I/O configuration and I/O scanning of up to 30 TRIO blocks. Email:sean@xmbse.cn

Unlock Optimal Performance with ABB TB861V011 3BSE090352R1 in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V011 extends the Modulebus from one DIN-rail to another. Length 1.1 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD0-RSH-1 CHANNEL ISOLATED BARRIER,

1-CHANNEL SIGNAL CONDITIONER, 24 V DC SUPPLY (LOOP POWERED), LOGIC INPUT 16 V DC ... 30 V DC, NON-POLARIZED, FAIL-SAFE RELAY CONTACT OUTPUT, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 20 MM, NUMBER OF CHANNELS: 1-CHANNEL, SAFETY INTEGRITY LEVEL (SIL): SIL 3, RATED VOLTAGE: 0-SIGNAL: 0 ... 5 V DC , LOOP POWERED 1-SIGNAL: 16 ... 30 V DC , LOOP POWERED, TYPE: 1 X LOGIC INPUT, TYPE [2]: FIELD DEVICE SUPPLY, TYPE: 3 X RELAY (NO CONTACT) Email:sean@xmbse.cn

ABB CI865 3BSE040795R1 Satt 19 inch rack I/O, a rack-based I/O system, can be connected to AC 800M using the CI865 interface module

Satt 19 inch rack I/O, a rack-based I/O system, can be connected to AC 800M using the CI865 interface module CI865 supports online replacement (Hot Swap), and does not require any configuration before installation The CI865 unit handles I/O scanning of up to 31 distributed I/O systems Email:sean@xmbse.cn

ABB TB861V011 3BSE090352R1: Paving the Way for 2024 Industrial Excellence.

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V011 extends the Modulebus from one DIN-rail to another. Length 1.1 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD2-RSH-1.2E.L3 CHANNEL ISOLATED BARRIER,

1-CHANNEL SIGNAL CONDITIONER, 24 V DC SUPPLY, LOGIC INPUT 19 V DC ... 26.4 V DC, RECOMMENDED CONNECTABLE VOLTAGE 50 V AC ... 230 V AC, 60 V DC ... 110 V DC, RELAY CONTACT OUTPUT FOR ENERGIZED TO SAFE FUNCTION , LINE FAULT TRANSPARENCY (LFT), DIAGNOSTIC FUNCTION, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 20 MM, NUMBER OF CHANNELS: 1-CHANNEL, DIAGNOSTICS FUNCTION, LINE FAULT TRANSPARENCY, ETS FUNCTION (ENERGIZED TO SAFE), SAFETY INTEGRITY LEVEL (SIL): SIL 3, SYSTEMATIC CAPABILITY (SC): SC 3 Email:sean@xmbse.cn

Foxboro RH924YF | FCP280 Vertical-Mounted Baseplate

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TB861V015 3BSE088164R1 - Premium Modulebus Rail Extension for 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V015 extends the Modulebus from one DIN rail to another. Length 1.5 m. Email:sean@xmbse.cn

Premium 1TGE120025R0101 Model Product - High-Quality and Advanced Solution

⭐brand new ⭐huge discount ⭐12 Months Warranty

INVENSYS FOXBORO RTU50 0301061B SF06191600 IN STOCK

⭐brand new ⭐huge discount ⭐12 Months Warranty

Discover the Excellence of ABB TB861V015 3BSE088164R1 in Industrial Applications

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V015 extends the Modulebus from one DIN rail to another. Length 1.5 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD0-RO-2 CHANNEL ISOLATED BARRIER,

1-CHANNEL SIGNAL CONDITIONER, 24 V DC SUPPLY, LOGIC INPUT 19 V DC ... 26.4 V DC, RECOMMENDED CONNECTABLE VOLTAGE 50 V AC ... 230 V AC, 60 V DC ... 110 V DC, RELAY CONTACT OUTPUT FOR ENERGIZED TO SAFE FUNCTION , LINE FAULT TRANSPARENCY (LFT), DIAGNOSTIC FUNCTION, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 20 MM, NUMBER OF CHANNELS: 1-CHANNEL, DIAGNOSTICS FUNCTION, LINE FAULT TRANSPARENCY, ETS FUNCTION (ENERGIZED TO SAFE), SAFETY INTEGRITY LEVEL (SIL): SIL 3, SYSTEMATIC CAPABILITY (SC): SC 3 Email:sean@xmbse.cn

INVENSYS FOXBORO FBM207C P0917GY Input Module

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TB861V015 3BSE088164R1 - The Key to Efficient Modulebus Connectivity in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V015 extends the Modulebus from one DIN rail to another. Length 1.5 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KCD2-STC-Ex1.ES CHANNEL ISOLATED BARRIER,

1-CHANNEL SIGNAL CONDITIONER, 24 V DC SUPPLY, LOGIC INPUT 19 V DC ... 26.4 V DC, RECOMMENDED CONNECTABLE VOLTAGE 50 V AC ... 230 V AC, 60 V DC ... 110 V DC, RELAY CONTACT OUTPUT FOR ENERGIZED TO SAFE FUNCTION , LINE FAULT TRANSPARENCY (LFT), DIAGNOSTIC FUNCTION, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 20 MM, NUMBER OF CHANNELS: 1-CHANNEL, DIAGNOSTICS FUNCTION, LINE FAULT TRANSPARENCY, ETS FUNCTION (ENERGIZED TO SAFE), SAFETY INTEGRITY LEVEL (SIL): SIL 3, SYSTEMATIC CAPABILITY (SC): SC 3 Email:sean@xmbse.cn

Foxboro P0916WE TERMINATION CABLE

⭐brand new ⭐huge discount ⭐12 Months Warranty

Unlock Optimal Performance with ABB TB861V015 3BSE088164R1 Module in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V015 extends the Modulebus from one DIN rail to another. Length 1.5 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD2-STC4-EX2 CHANNEL ISOLATED BARRIER,

1-CHANNEL ISOLATED BARRIER, 24 V DC SUPPLY (POWER RAIL), DRY CONTACT OR NAMUR INPUT, 2 PASSIVE TRANSISTOR OUTPUTS, USABLE AS SIGNAL SPLITTER (1 INPUT AND 2 OUTPUTS), REVERSIBLE MODE OF OPERATION, LINE FAULT DETECTION (LFD), HOUSING WIDTH 12.5 MM, UP TO SIL 2 (SC 3) ACC. TO IEC/EN 61508, HOUSING WIDTH: 12.5 MM, NUMBER OF CHANNELS: 1-CHANNEL, SAFETY INTEGRITY LEVEL (SIL): SIL 2, SYSTEMATIC CAPABILITY (SC): SC 3, RATED VOLTAGE: 19 ... 30 V DC, FIELD DEVICE: NAMUR SENSOR, FIELD DEVICE [2]: VOLT-FREE CONTACT Email:sean@xmbse.cn

Foxboro P0916WF Baseplate Cable

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TB861V015 3BSE088164R1: Leading the Way in Modulebus Technology for 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. A cluster of up to 12 I/O units can be connected to one FCI. If they are all on the same DIN rail, the I/O MTUs are connected to each other. The Modulebus then goes though the I/O MTUs. If not all the I/O MTUs can fit on the same DIN rail, TB861 can be used to extend the Modulebus to the first I/O MTU on the next DIN rail. The outlet part is connected to the bottom of the last I/O MTU on the first DIN rail. The inlet part is connected to the top of the first I/O MTU on the second DIN rail. TB861V015 extends the Modulebus from one DIN rail to another. Length 1.5 m. Email:sean@xmbse.cn

PEPPERL + FUCHS KFD2-SCD2-Ex2.LK CHANNEL ISOLATED BARRIER,

1-CHANNEL ISOLATED BARRIER, 24 V DC SUPPLY (POWER RAIL), DRY CONTACT OR NAMUR INPUT, 2 PASSIVE TRANSISTOR OUTPUTS, USABLE AS SIGNAL SPLITTER (1 INPUT AND 2 OUTPUTS), REVERSIBLE MODE OF OPERATION, LINE FAULT DETECTION (LFD), HOUSING WIDTH 12.5 MM, UP TO SIL 2 (SC 3) ACC. TO IEC/EN 61508, HOUSING WIDTH: 12.5 MM, NUMBER OF CHANNELS: 1-CHANNEL, SAFETY INTEGRITY LEVEL (SIL): SIL 2, SYSTEMATIC CAPABILITY (SC): SC 3, RATED VOLTAGE: 19 ... 30 V DC, FIELD DEVICE: NAMUR SENSOR, FIELD DEVICE [2]: VOLT-FREE CONTACT Email:sean@xmbse.cn

Foxboro P0916VB Termination Cable

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TL810K01 3BSE088170R1 - Premium Component for 2024 Industrial Needs

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. Empty slot protector for a Fieldbus Communication Interface slot on the Ethernet FCI Module Termination Unit. 10 pieces per package. Email:sean@xmbse.cn

1SDA038292R1 | SHUNT OPEN.RELEASE | ABB

⭐brand new ⭐huge discount ⭐12 Months Warranty

Foxboro P0922AG | I/A Series System

⭐brand new ⭐huge discount ⭐12 Months Warranty

Discover the Excellence of ABB TL810K01 3BSE088170R1 in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. Empty slot protector for a Fieldbus Communication Interface slot on the Ethernet FCI Module Termination Unit. 10 pieces per package. Email:sean@xmbse.cn

1SBP260150R1001 TC50 | Control Panel | ABB

⭐brand new ⭐huge discount ⭐12 Months Warranty

Foxboro FBM207 P0914TD | I/A Series System

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TL810K01 3BSE088170R1 - The Key to Advanced Industrial Solutions in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. Empty slot protector for a Fieldbus Communication Interface slot on the Ethernet FCI Module Termination Unit. 10 pieces per package. Email:sean@xmbse.cn

1SAP260100R3001 PD501-4CH | Analog I/O Module | ABB

⭐brand new ⭐huge discount ⭐12 Months Warranty

Foxboro FBM216 P0917TN | I/A Series System

⭐brand new ⭐huge discount ⭐12 Months Warranty

Unlock Optimal Performance with ABB TL810K01 3BSE088170R1 in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. Empty slot protector for a Fieldbus Communication Interface slot on the Ethernet FCI Module Termination Unit. 10 pieces per package. Email:sean@xmbse.cn

ELAU MC-4/11/10/400 VDM01D10AA00 HW EOQ603 FW V0022.XX Servo Drive

⭐brand new ⭐huge discount ⭐12 Months Warranty

Foxboro FBM244 RH927AK | HART 4 Input

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB TL810K01 3BSE088170R1: Paving the Way for 2024 Industrial Success

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. Empty slot protector for a Fieldbus Communication Interface slot on the Ethernet FCI Module Termination Unit. 10 pieces per package. Email:sean@xmbse.cn

Company profile

All products