China PLC,DCS and ESD Modules Supplier

ABB FTB890K01 3BSE078760R1: Paving the Way for 2024 Industrial Innovation

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. The FTB890 is a field terminal block with 4 screw terminals to be used with a single intrinsically safe Signal Conditioning Module. The FTB is installed on the MTU for Select I/O (TUS810) and includes a keying mechanism that is set to a certain code when an SCM is inserted for the first time to ensure only the same type of SCM can be installed in that slot. The key can be reset by removing and reinserting the FTB. (10 pieces per package). Email:sean@xmbse.cn

6ES7134-6GF00-0AA1 SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit

SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit Email: Sean@xmbse.cn

ABB AI830A 3BSE040662R1 8 channels for RTD (Pt100, Cu10, Ni100 and Ni120 and resistor) inputs

The AI830/AI830A RTD Input Module has 8 channels for measurement of temperature with resistive elements (RTDs). With 3-wire connections. All the RTDs must be isolated from ground. The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors. Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module. Every channel can be individually configured. The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz). Email:sean@xmbse.cn

ABB PTB810K01 3BSE088182R1 - Premium Terminal Block for 2024 Industrial Needs

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB810K01 Power Injection Terminal Block Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB810s are needed per MTU. Digital output SCMs (DOS810, DOS880, DOS885) and high amp SCMs (DOS885, AIS885) require power injection. (10 pieces per package). Email:sean@xmbse.cn

6ES7134-6FF00-0AA1 SIMATIC ET 200SP, Analog input module, AI 8XU Basic, suitable for BU type A0, A1, Color code CC02, Module diagnostics, 16 bit

SIMATIC ET 200SP, Analog input module, AI 8XU Basic, suitable for BU type A0, A1, Color code CC02, Module diagnostics, 16 bit Email: Sean@xmbse.cn

ABB AI835A 3BSE051306R1 8 differential input channels for thermocouple/mV.

The AI835/AI835A provides 8 differential input channels for Thermocouple/mV measurements. Measurement ranges configurable per channel are: -30 mV to +75 mV linear, or TC Types B, C, E, J, K, N, R, S and T, for AI835A also D, L and U. One of the channels (Channel 8) may be configured for “Cold Junction” (ambient) temperature measurements, thus serving as CJ-channel for Ch. 1...7. The junction temperature may be measured locally on the MTUs screw terminals, or on a connection unit distant form the device. Alternatively, a fix junction temperature for the module may be set by the user (as parameter) or for AI835A also from the application. Channel 8 may be used in the same manner as Ch. 1...7 when no CJ-temperature measurement is needed. Email:sean@xmbse.cn

Discover the Excellence of ABB PTB810K01 3BSE088182R1 in Industrial Applications

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB810K01 Power Injection Terminal Block Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB810s are needed per MTU. Digital output SCMs (DOS810, DOS880, DOS885) and high amp SCMs (DOS885, AIS885) require power injection. (10 pieces per package). Email:sean@xmbse.cn

6ES7132-6BH01-0BA0 SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC00, substitu

SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC00, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage Email: Sean@xmbse.cn

ABB AI843 3BSE028925R1 A separate channel is used as CJ-channel (4-wire Pt100 RTD)

The AI843 Thermocouple/mV Input Module provides 8 differential input channels for Thermocouple/mV measurements. Measurement ranges configurable per channel are: -30 mV to +75 mV linear, or TC Types B, C, E, J, K, L, N, R, S, T and U. A separate Pt100 channel is used for “Cold Junction” (ambient) temperature measurements, thus serving as CJ-channel for Ch. 1...8. The junction temperature may be measured locally on the MTUs screw terminals, or on a connection unit distant form the device. Alternatively, a fix junction temperature for the module may be set by the user (as parameter) or a junction temperature set by the application. Email:sean@xmbse.cn

ABB PTB810K01 3BSE088182R1 - The Key to Efficient Industrial Electrical Connections in 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB810K01 Power Injection Terminal Block Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB810s are needed per MTU. Digital output SCMs (DOS810, DOS880, DOS885) and high amp SCMs (DOS885, AIS885) require power injection. (10 pieces per package). Email:sean@xmbse.cn

6EP4348-7RB00-0AX0 SITOP RED1200 redundancy module input/output: DC 24/48V/80 A Suitable for decoupling two SITOP power supplies with maximal per 40 A output current

SITOP RED1200 redundancy module input/output: DC 24/48V/80 A Suitable for decoupling two SITOP power supplies with maximal per 40 A output current Email: Sean@xmbse.cn

ABB AI845 3BSE023675R1 8 channels for 0...20 mA, 4...20 mA, 0...5 V or 1...5 V d.c., single ended unipolar inputs

The AI845 Analog Input Module for single or redundant applications. The module has 8 channels. Each channel can be either a voltage or current input when MTU TU844 or TU845 is used, when other MTUs are used all channels become voltage or current inputs. The voltage and current input is able to withstand an overvoltage or undervoltage of at least 11 V d.c. The input resistance for voltage input is greater than 10 M ohm and the input resistance for current input is 250 ohm. The module distributes the external HART compatible transmitter supply to each channel. This adds a simple connection to distribute the supply to 2-wire or 3-wire transmitters. The transmitter power is supervised and current limited. Email:sean@xmbse.cn

Unlock Optimal Performance with ABB PTB810K01 3BSE088182R1 in Industrial Setups

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB810K01 Power Injection Terminal Block Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB810s are needed per MTU. Digital output SCMs (DOS810, DOS880, DOS885) and high amp SCMs (DOS885, AIS885) require power injection. (10 pieces per package). Email:sean@xmbse.cn

6EP4346-7RB00-0AX0 SITOP RED1200 REDUNDANCY MODULE INPUT/OUTPUT: 24/48 V DC/20 A SUITABLE FOR DECOUPLING TWO SITOP POWER SUPPLIES WITH MAX. 10 A OUTPUT CURRENT EACH

SITOP RED1200 REDUNDANCY MODULE INPUT/OUTPUT: 24/48 V DC/20 A SUITABLE FOR DECOUPLING TWO SITOP POWER SUPPLIES WITH MAX. 10 A OUTPUT CURRENT EACH Email: Sean@xmbse.cn

ABB AI880A 3BSE039293R1 8 channels for 0...20 mA, 4...20 mA, single ended unipolar inputs 12 bit resolution

The AI880A High Integrity Analog Input Module is designed for single and redundant configuration. The module has 8 current input channels. The input resistance is 250 ohm. The module distributes the external transmitter supply to each channel. This adds a simple connection to distribute the supply to 2- or 3-wire transmitters. The transmitter power is supervised and current limited. All eight channels are isolated from the ModuleBus in one group. Power to the Module is generated from the 24 V on the ModuleBus. The AI880A complies with the NAMUR recommendation NE43, and supports configurable over- and under range limits. Email:sean@xmbse.cn

ABB PTB810K01 3BSE088182R1: Leading the Way in Industrial Terminal Block Solutions for 2024

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB810K01 Power Injection Terminal Block Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB810s are needed per MTU. Digital output SCMs (DOS810, DOS880, DOS885) and high amp SCMs (DOS885, AIS885) require power injection. (10 pieces per package). Email:sean@xmbse.cn

6EP3337-8SB00-0AY0 SITOP PSU8200 24 V/40 A stabilized power supply input: 120/230 V AC output: 24 V DC/40 A

SITOP PSU8200 24 V/40 A stabilized power supply input: 120/230 V AC output: 24 V DC/40 A Email: Sean@xmbse.cn

ABB AI890 3BSC690071R1 8 channels for 0...20 mA or 4...20 mA, single ended unipolar inputs.

The AI890 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can be either a current input or power and monitor a two-wire process transmitter. The current input is for externally powered transmitters. The input voltage drop of the current input is typically 3 V, PTC included. The transmitter supply for each channel is able to provide at least 15 V at a 20 mA loop current to power Ex certified process transmitters and is limited to 23 mA in overload conditions. All eight channels are isolated from the ModuleBus and power supply in one group. Power to the input stages is converted from the 24 V on the power supply connections. TU890 and TU891 Compact MTU can be used with this module and it enables two wire connection to the process devices without additional terminals. TU890 for Ex applications and TU 891 for non Ex applications. Email:sean@xmbse.cn

ABB PTB820K01 2PAA125365R1 - Premium Terminal Block for 2024 Industrial Applications

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB820K01 Power Injection Terminal Block (Red) 120/230 V Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB820s are needed per MTU. (10 pieces per package). Email:sean@xmbse.cn

6EP1961-3BA21 SITOP PSE202U REDUNDANCY MODULE INPUT/OUTPUT: 24 V/40 A DC CAN BE USED FOR DECOUPLING OF 2 SITOP POWER SUPPLIES WITH 20 A MAX. OUTPUT CURRENT EACH

SITOP PSE202U REDUNDANCY MODULE INPUT/OUTPUT: 24 V/40 A DC CAN BE USED FOR DECOUPLING OF 2 SITOP POWER SUPPLIES WITH 20 A MAX. OUTPUT CURRENT EACH Email: Sean@xmbse.cn

ABB AI893 3BSC690141R1 8 differential input channels for 2 or 3-wire RTD and Thermocouple.

The AI893 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. The module can be configured for either 2 or 3-wire RTD sensors or for TC sensors. In TC mode, channel 8 be used for Cold Junction (ambient) temperature measurements, thus serving as CJ-channel for channel 1...7. The junction temperature may be measured locally on the MTUs screw terminals, or on a connection unit distant from the device. The cold junction temperature is measured with a 3-wire Pt 100 sensor. Alternatively, a fix junction temperature for the module may be set by the user (as parameter). Channel 8 may be used in the same manner as channel 1-7 when no CJ-temperature measurement is needed. TU890 and TU891 Compact MTU can be used with this module and it enables three wire connection to the process devices without additional terminals. TU890 for Ex applications and TU891 for non Ex applications. Email:sean@xmbse.cn

Discover the Superiority of ABB PTB820K01 2PAA125365R1 in Industrial Setups

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB820K01 Power Injection Terminal Block (Red) 120/230 V Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB820s are needed per MTU. (10 pieces per package). Email:sean@xmbse.cn

6EP1334-2BA20 SITOP PSU100S 24 V/10 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC, OUTPUT: DC 24 V/10 A

SITOP PSU100S 24 V/10 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC, OUTPUT: DC 24 V/10 A Email: Sean@xmbse.cn

ABB AI895 3BSC690086R1 8 channels for 4...20 mA, single ended unipolar inputs.

The AI895 Analog Input Module can directly interface 2-wire transmitters and with a particular connection it can also interface 4-wire transmitters without losing the HART capability. The AI895 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can power and monitor a two-wire process transmitter and HART communication. The input voltage drop of the current input is typically 3 V, PTC included. The transmitter supply for each channel is able to provide at least 15 V at a 20 mA loop current to power Ex certified process transmitters and is limited to 23 mA in overload conditions. TU890 and TU891 Compact MTU can be used with this module and it enables two wire connection to the process devices without additional terminals. TU890 for Ex applications and TU891 for non Ex applications. Email:sean@xmbse.cn

ABB PTB820K01 2PAA125365R1 - The Key Component for Efficient Industrial Electrical Connections in 2024

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB820K01 Power Injection Terminal Block (Red) 120/230 V Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB820s are needed per MTU. (10 pieces per package). Email:sean@xmbse.cn

6DL1193-6TP00-0DM1 SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE M1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 45 MM,

SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE M1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 45 MM, Email: Sean@xmbse.cn

Schneider STBNIP2311 Interface Module。

⭐brand new ⭐huge discount ⭐12 Months Warranty

Unlock Optimal Performance with ABB PTB820K01 2PAA125365R1 in Industrial Operations

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB820K01 Power Injection Terminal Block (Red) 120/230 V Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB820s are needed per MTU. (10 pieces per package). Email:sean@xmbse.cn

6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE H1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 22.5 MM,

SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE H1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 22.5 MM, Email: Sean@xmbse.cn

ABB AO801 3BSE020514R1 8 channels of 0...20 mA, 4...20 mA outputs

The AO801 Analog Output Module has 8 unipolar analog output channels. The module performs selfdiagnostic cyclically. A low internal power supply sets the module in INIT state (no signal from the module). Email:sean@xmbse.cn

ABB PTB820K01 2PAA125365R1: Leading the Way in Industrial Terminal Block Solutions for 2024

Select I/O is an Ethernet networked, single-channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The PTB820K01 Power Injection Terminal Block (Red) 120/230 V Kit is used for the Select I/O Module Termination Unit (TUS810). Two PTB820s are needed per MTU. (10 pieces per package). Email:sean@xmbse.cn

6DL1193-6TP00-0BM1 SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE M1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE WIDTH: 45 MM,

SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE M1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE WIDTH: 45 MM, Email: Sean@xmbse.cn

ABB DI802 3BSE022360R1 8 channels for 120 V a.c./d.c. inputs with current sinking

The DI802 is an 8 channel 120 V a.c./d.c. digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 77 - 130 volt and the input current is 10 mA at 120 V a.c. The d.c. input range is 75 - 145 V and the input current is 2.8 mA at 110 V. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. Email:sean@xmbse.cn

ABB FTB840K01 3BSE093007R1 - Industrial Automation Component

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The FTB840 is a redundant terminal signal block with 4 screw terminals to be used with a redundant pair of Signal Conditioning Modules. The FTB is installed on the MTU for Select I/O (TUS810) and includes a keying mechanism that is set to a specific code when an SCM is first inserted to ensure only the same type of SCM can be installed in that slot. The key can be reset by removing and reinserting the FTB. (10 pieces per package) Email:sean@xmbse.cn

6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE H1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 22.5 MM,

SIMATIC ET 200SP HA, TERMINAL BLOCK, TYPE H1, 32 PUSH-IN TERMINALS, INTERNAL REFERENCE TEMPERATURE NEW LOAD GROUP, WIDTH: 22.5 MM, Email: Sean@xmbse.cn

ABB DI803 3BSE022362R1 8 channels for 230 V a.c./d.c. inputs with current sinking

The DI803 is an 8 channel 230 V a.c./d.c. digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 164 - 264 volt and the input current is 7.6 mA at 230 V a.c. The d.c. input range is 175 - 275 V and the input current is 1.6 mA at 220 V. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. Email:sean@xmbse.cn

FTB840K01 3BSE093007R1 by ABB - Key Element in Automation Systems

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The FTB840 is a redundant terminal signal block with 4 screw terminals to be used with a redundant pair of Signal Conditioning Modules. The FTB is installed on the MTU for Select I/O (TUS810) and includes a keying mechanism that is set to a specific code when an SCM is first inserted to ensure only the same type of SCM can be installed in that slot. The key can be reset by removing and reinserting the FTB. (10 pieces per package) Email:sean@xmbse.cn

6DL1193-6MD00-0AA0 ET 200SP HA MOUNTING RAIL 1500 MM (APPROX. 59 INCH) INCL. GROUNDING SCREW, INTEGRATED DIN RAIL FOR MOUNTING OF INCIDENTALS SUCH AS TERMINALS, AUTOMATIC CIRCUIT BREAKERS AND

ET 200SP HA MOUNTING RAIL 1500 MM (APPROX. 59 INCH) INCL. GROUNDING SCREW, INTEGRATED DIN RAIL FOR MOUNTING OF INCIDENTALS SUCH AS TERMINALS, AUTOMATIC CIRCUIT BREAKERS AND RELAYS Email: Sean@xmbse.cn

ABB DI810 3BSE008508R1 16 channels for 24 V d.c. inputs with current sinking

The DI803 is an 8 channel 230 V a.c./d.c. digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 164 - 264 volt and the input current is 7.6 mA at 230 V a.c. The d.c. input range is 175 - 275 V and the input current is 1.6 mA at 220 V. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. Email:sean@xmbse.cn

ABB's FTB840K01 3BSE093007R1 - A Crucial Part for Industrial Processes

Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes, and supports standardization of I/O cabinetry ensuring automation projects are delivered on time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel. The FTB840 is a redundant terminal signal block with 4 screw terminals to be used with a redundant pair of Signal Conditioning Modules. The FTB is installed on the MTU for Select I/O (TUS810) and includes a keying mechanism that is set to a specific code when an SCM is first inserted to ensure only the same type of SCM can be installed in that slot. The key can be reset by removing and reinserting the FTB. (10 pieces per package) Email:sean@xmbse.cn

Company profile

All products