China PLC,DCS and ESD Modules Supplier

Discover the Excellence of ABB TU805K01 3BSE035990R1 in Industrial Systems

The TU805K01 is a kit consisting of 10 pcs TU805. TU805 is a 16-channel 50 V terminal unit for the S800 I/O modules DI801 and DO801. The Terminal Unit is a passive unit for the distribution of external process power. Email:sean@xmbse.cn

Siemens 6ES7155-6AU00-0DN0 ET 200SP Interface Module - High Quality

⭐brand new⭐huge discount ⭐12 Months Warranty IM155-6 PN High Speed, with service module, without bus adapter

Schneider 140ARI03010C Analog Input Module

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DI890 3BSC690073R1 8 channels with process voltage supervision Output status indicators

The DI890 Digital Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel is galvanically isolated from the power supply, ground, and each other. Intrinsically safe Proximity sensors or volt-free contacts can be powered and monitored by any channel. The Proximity sensor should conform to the NAMUR standard and line faults can be detected without any additional external components. For line faults to be detected when using volt-free contacts, external resistors should be connected in series and in parallel to enable the state of the field circuit to be sensed by the input channel. All eight channels are galvanic isolated from the ModuleBus and power supply individually. Power to the input stages is converted from the 24 V on the power supply connections. Three LEDs indicate module status Fault (Red), Run (Green) and Warning (Yellow). TU890 and TU891 Compact MTU can be used with this module and it enables two wire connection to the process devices without additional terminals. TU890 for Ex applications and TU891 for non Ex applications. Email:sean@xmbse.cn

ABB TU810V1 3BSE013230R1: The Compact Module for Industrial Automation

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens 6ES7155-6AR00-0AN0 Profinet Interface Module 6ES7 155-6AR00-0AN0

⭐brand new⭐huge discount ⭐12 Months Warranty IM155-6 PN basic type, including service module, integrated 2×RJ45 interface

SCHNEIDER MA-0185-100(C) Communication Line Tap

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DO801 3BSE020510R1 16 channels for 24 V d.c. current sourcing outputs Short-circuit protection to ground and 30 V

The DO801 is a 16 channel 24 V digital output module for the S800 I/O. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are in one isolated group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier. Email:sean@xmbse.cn

Unveiling the Capabilities of ABB TU810V1 3BSE013230R1 in Control Systems

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens 6ES7155-6AU00-0BN0 Interface Module - High Quality and Performance

⭐brand new⭐huge discount ⭐12 Months Warranty IM 155-6 PN/3 High Performance, 3 ports, 2 fieldbus adapter interfaces, incl. service module, without fieldbus adapter

Schneider 172PNN26022 Momentum Redundant Adapter

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DO802 3BSE022364R1 8 channels for 110 V d.c. / 250 V a.c. relay Normally Open (NO) outputs

The DO802 is an 8 channel 110 V d.c./250 V a.c. relay (NO) output module for the S800 I/O. The maximum voltage range is 250 V and the maximum continuous output current is 2 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage supervision, derived from the 24 V distributed on the ModuleBus, gives a channel signal error and a module warning signal if the voltage disappears. The error signal and warning signal can be read through the ModuleBus. This supervision can be enabled/disabled with a parameter. Email:sean@xmbse.cn

ABB TU810V1 3BSE013230R1: A Key Component in Industrial Process Control

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens 6ES7155-6AU01-0CN0 Simatic ET200SP Interface Module - High Quality

⭐brand new⭐huge discount ⭐12 Months Warranty

ABB PM5650-2ETH 1SAP141000R0278 | Processor Module

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DO810 3BSE008510R1 16 channels for 24 V d.c. current sourcing outputs Output status indicators

This module has 16 digital outputs. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier. The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read through the ModuleBus. The outputs are current limited and protected against over temperature. If the outputs are overloaded the output current will be limited. Email:sean@xmbse.cn

Decoding the Significance of ABB TU810V1 3BSE013230R1 in Automation

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens 6ES71556MU000CN0 ET 200SP. IM155-6MF HF ; 6ES71556MU000CN0

⭐brand new⭐huge discount ⭐12 Months Warranty

Schneider 171CCC78010 Processor Adaptor

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DO814 3BUR001455R1 2 isolated groups of 8 channels with process voltage supervision

The DO814 is a 16 channel 24 V digital output module with current sinking for the S800 I/O. The output voltage range is 10 to 30 volt and the maximum continuous current sinking is 0.5 A. The outputs are protected against short circuits and over temperature. The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a short circuit and over temperature protected low side switch, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier. The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read via the ModuleBus. Email:sean@xmbse.cn

ABB TU810V1 3BSE013230R1: The Reliable Module for Industrial Applications

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens ET 200SP Bus Adapter 6ES7193-6AR00-0AA0 - High Quality Assurance

⭐brand new⭐huge discount ⭐12 Months Warranty

Schneider ATV930D37N4 Variable Speed Drive

⭐brand new ⭐huge discount ⭐12 Months Warranty

ABB DO815 3BSE013258R1 8 channels for 24 V d.c. current sourcing outputs

The DO815 is a 8 channel 24 V digital output module for the S800 I/O. The output voltage range is 10 to 30 V and the maximum continuous output current is 2 A @ 24 V. The outputs are protected against short circuits, and over load. The outputs are divided into two individually isolated groups with four output channels in each group. Each output channel consists of a short circuit and over load protected high side driver with open load detection (on active signal), EMC protection components, inductive load suppression, output status indication LEDs and optical isolation barrier. Email:sean@xmbse.cn

ABB TU811V1 3BSE013231R1: The Reliable Module for Industrial Applications

The TU811V1 is a 8 channel 250 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens ET 200SP, Busadapter BA 2XFC - 6ES71936AF000AA0

⭐brand new⭐huge discount ⭐12 Months Warranty

KFD0-RSH-1.4S.PS2 CHANNEL ISOLATED BARRIER,

1-CHANNEL ISOLATED BARRIER, 24 V DC SUPPLY (POWER RAIL), INPUT FOR 2-WIRE SMART TRANSMITTERS AND CURRENT SOURCES, OUTPUT FOR 4 MA ... 20 MA OR 1 V ... 5 V, SINK OR SOURCE MODE, LINE FAULT DETECTION (LFD), HOUSING WIDTH 12.5 MM, UP TO SIL 3 ACC. TO IEC/EN 61508, HOUSING WIDTH: 12.5 MM, NUMBER OF CHANNELS: 1-CHANNEL, HART COMMUNICATION, SAFETY INTEGRITY LEVEL (SIL): SIL 3, SYSTEMATIC CAPABILITY (SC): SC 3, RATED VOLTAGE: 19 ... 30 V DC, FIELD DEVICE: 2-WIRE TRANSMITTER, FIELD DEVICE [2]: CURRENT SOURCE Email:sean@xmbse.cn

ABB DO818 3BSE069053R1 2 isolated groups (RIV50V) with 16 channels and one process voltage supervision input in each group

The DO818 is a 32 channel 24 V digital output module for the S800 I/O. This module has 16 digital outputs. The output voltage range is 12 to 32 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are divided into two individually isolated groups with 16 output channels and one voltage supervision input in each group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier. The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read through the ModuleBus. Email:sean@xmbse.cn

Unveiling the Features and Functions of ABB TU811V1 3BSE013231R1

The TU811V1 is a 8 channel 250 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

6ES71936AP000AA0 - SIMATIC ET 200SP BA 2XSCRJ

⭐brand new⭐huge discount ⭐12 Months Warranty

6ES7155-6AU00-0HM0 SIMATIC ET 200SP, PROFINET INTERFACE MOD. IM155-6PN R1

SIMATIC ET 200SP, PROFINET INTERFACE MOD. IM155-6PN R1 Email: Sean@xmbse.cn

ABB DO820 3BSE008514R1 8 channels for 230 V a.c./d.c. relay Normal Open (NO) outputs

The DO820 is an 8 channel 230 V a.c./d.c. relay (NO) output module for the S800 I/O. The maximum output voltage is 250 V a.c./d.c. and the maximum continuous output current is 3 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage supervision, derived from the 24 V distributed on the ModuleBus, gives an error signal if the voltage disappears, and the Warning LED turns on. The error signal can be read through the ModuleBus. This supervision can be enabled/disabled with a parameter. Email:sean@xmbse.cn

ABB TU811V1 3BSE013231R1: A Key Component in Industrial Automation Systems

The TU811V1 is a 8 channel 250 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

6ES7193-6AP40-0AA0 Siemens Bus Adapter - In Stock and Ready to Ship

⭐brand new⭐huge discount ⭐12 Months Warranty Bus adapter BA 1×SCRJ optical fiber/1×FC quick-connect type

6ES7134-6JD00-0CA1 SIMATIC ET 200SP, AI 4xRTD/TC 2-/3-/4-Wire HF

SIMATIC ET 200SP, AI 4xRTD/TC 2-/3-/4-Wire HF Email: Sean@xmbse.cn

ABB DO821 3BSE013250R1 8 channels for 230 V a.c./d.c. relay Normal Closed (NC) outputs

The DO821 is an 8 channel 230 V a.c./d.c. relay (NC) output module for the S800 I/O. The maximum output voltage is 250 V a.c. and the maximum continuous output current is 3 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage supervision, derived from the 24 V distributed on the ModuleBus, gives an error signal if the voltage disappears, and the Warning LED turns on. The error signal can be read via the ModuleBus. This supervision can be enabled/disabled with a parameter. Email:sean@xmbse.cn

Exploring the Applications of ABB TU811V1 3BSE013231R1 in Various Industries

The TU811V1 is a 8 channel 250 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus. The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations. Email: Sean@xmbse.cn

Siemens 6ES7193-6AP20-0AA0 ET200SP Bus Adapter - High Quality and Reliable

⭐brand new⭐huge discount ⭐12 Months Warranty

6ES7405-0KR02-0AA0 SIMATIC S7-400, POWER SYPPLY PS405: 10 A REDUNDANT

SIMATIC S7-400, POWER SYPPLY PS405: 10 A REDUNDANT Email: Sean@xmbse.cn

ABB DO828 3BSE069055R1 16 channels for 125V d.c. / 250V a.c. relay outputs

The DO828 is an 16 channel 125V d.c. / 250V a.c. relay output module for the S800 I/O. The maximum output voltage is 125V d.c. / 250V a.c. and the maximum continuous output current is 2A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage supervision, derived from the 12 V distributed on the ModuleBus, gives an error signal if the voltage disappears, and the Warning LED turns on. The error signal can be read through the ModuleBus. This supervision can be enabled/disabled with a parameter. Email:sean@xmbse.cn

Company profile

All products