Adjustable tile roof hook POW-TRH-T09

Adjustable hooks are rail clips firmly fixed on the roof tiles, adjustable in height and easy to install and remove.

Tile roof hook POW-TRH-T10

There are roof hooks available for rail clamps. These roof hooks are designed to securely attach the rail clamp to a tile roof. The hooks come in various sizes to accommodate different rail clamp sizes and can be easily installed with screws.

Tile roof hook POW-TRH-T11

Roof hooks provide an easy way to mount rails and solar panels without damaging shingle integrity and provide secure support between the roof structure and the railing.

Adjustable tile roof hook POW-TRH-T12

It is adjustable hook, which can easily adjust the tension of the clips and accurately align the roof and rails. Fix the rail firmly on the roof tiles.

Adjustable tile roof hook POW-TRH-T13

The adjustable tile roof hook is a rail clamp designed to be used with a variety of roof tiles. It is designed to securely attach the rail clamp to the roof tile, allowing for easy installation and removal. The adjustable tile roof hook is made from durable stainless steel and is corrosion resistant.

Flat tile roof hook POW-TRH-F01

Roof hooks made of stainless steel.The slightly angled length of the bar makes it less deformable, easy to install and adapts to different roof tiles.It can also be pre-assembled, reducing the cost of installation time.

Flat tile roof hook (Turn 90 °) POW-TRH-F02

Powerack hooks for Flat tile roof .Its unique design for cost savings and easy installation.

Flat tile roof hook POW-TRH-F04

Powerack hooks for flat tile roof .Cost-saving and easy to install.It provides customers lots of options.Customer can customize to their needs and meet the installation requirements.

Slate roof hook POW-TRH-S01

owerack hooks for Slate roof .Its unique design for cost savings and easy installation.Customer can customize to their needs and meet the installation requirements.

Slate roof hook POW-TRH-S02

Powerack Tile Roof Hooks, suitable for most roof types of Tile, Flat Tile, Slate Tile, Asphalt Shingle Tile. Customized allowed according to customer needs to meet special installation requirements.

U pile ground solar mounting system

Powerack U pile ground solar mounting system usually applicable to installation in large scale ground power station. The system uses piles that are driven into the ground and then secured with concrete or other materials. It ensures a secure and stable mounting structure. Every component of the system is pre-assembled, which can save you a lot of labor and time.

All-aluminum standard ground solar mounting system

Powerack all-aluminium standard ground mounting system applicable to installation systems in medium or large ground power station.Each component of the system is pre-assembled.And it features an innovative modular design, allowing for easy installation and reconfiguration of the mounting structure.

Solar Mounting Ground Screw

Ground Screw is a fastener to fix the solar panel to the ground.Its purpose is to provide a secure and stable foundation for the solar panel system.

All-aluminum carport solar mounting system

All-aluminum carport solar mounting system is a type of solar panel mounting system specially designed for carports.The aluminum frame of the system is lightweight ,durable and corrosion protection. And it is an ideal solution for those looking to install PV panels on their carport roofs without compromising aesthetics or performance.

All-aluminum waterproof carport solar mounting system

Powerack carport mounting system is a combination of photovoltaic power generation and carport.It not only has the functions of a traditional carport, but also brings power generation benefits to car owners.This system is made from high-grade aluminum alloy, making it lightweight yet incredibly strong, durable and Anti-corrosion.It also has waterproof seals to protect the PV panels from water damage.

Ballasted-B 10° wind shield POW-BUW-10

The POW-BUW-10 ballasted-B 10° wind shield is a solar mounting system designed to provide protection from strong winds and snow loads for photovoltaic (PV) modules.

Ballasted-B 15° wind shield POW-BUW-15

The Ballasted-B 15° wind shield is a solar mounting system designed to provide maximum protection from wind and snow loads. It features an adjustable tilt angle of up to 15°.

Adjustable tile roof hook POW-TRH-T15

Powerack has many shingle roof hook styles to accommodate different shingles. tile interface hook is quick to install. It offers many options for customers. Customers can customize it to meet their needs for installation requirements.

Adjustable tile roof hook POW-TRH-T18

Adjustable design of PV roof hooks allows for quick installation and ensures precise alignment. Has resistance to vibration, wind and snow.

Solar FRP Walkway POW-FRP

solar power maintenance walkway is specially designed by powerack to ensure the safety of the solar rooftop walkway area. It not only effectively extends the service life of commercial and industrial rooftop, but also provides a safe pathway for the equipment installed on the roof.

WeatherClip II 700 interface POW-TRB-C26

The Powerack WeatherClip II 700 interface is an essential component of the Powerack Solar Roof Non-Penetrative series.

WeatherClip II 700 interface POW-TRB-C30

Powerack WeatherClip II 700 interface. The clamps are designed to catch the standing seams effectively with ease.

Solar Panels Cable Clip POW-CCP-04

Cable clip for PV panels for holding 2 cables The POW-CCP-04 are made of corrosion resistant stainless steel 304, which makes them durable, long lasting and reliable solution fro all environments.

Solar Panels Cable Clip POW-CCP-05

Each clip holds 4 cables, this clip can secure wires well .

Standing Seam Metal Roof Clamps POW-TRB-C22

Powerack Standing Seam Power Clamp is an innovative mounting clamp.

Standing Seam Metal Roof Clamps POW-TRB-C31

Simplify , sturdy design guarantee safety of solar mounting systems .

KLIP-LOK 700 interface POW-TRB-C27

The Powerack Klip-Lok 700 interface set is an essential component of the Powerack Solar Roof Non-Penetrative series. We have various types standing seam clamps to meet your roof, we also can custom for you.

KLIP-LOK 700 interface POW-TRB-C38

The Powerack Klip-Lok 700 interface set is an essential component of the Powerack Solar Roof Non-Penetrative series.

Double adjustable tile roof hook POW-TRH-T14

Double-sided adjustable hook it has a high degree of durability and corrosion resistance, tile interface hook outstanding performance in installation speed and durability.

Double adjustable tile roof hook POW-TRH-T16

The Tile interface hook,It is highly durable and resistant to corrosion, making it an ideal choice for any application. Overall, the Tile interface hook offers excellent performance in terms of speed, reliability, and durability.

Tile roof hook POW-TRH-T20

This is a double-sided adjustable roof tile hook that ensures that the roof is not damaged to quality and that it is durable and strong. This hook will not be affected in any environment and is easy to install.

Solar cables POW-CAB-H1Z2Z2-K

The POW-CAB-H1Z2Z2-K cable, which is TÜV certified according to IEC 62930 and EN 50618, is suitable for both fixed and mobile solar installations .

Solar cables POW-CAB-UL4703

POW-CAB-UL4703 is a highly flexible solar cable . This cable is sunlight, ozone, UV, and moisture resistant. Photovoltaic Wire may be used as wiring forsolar panels, as the interconnection wiring of grounded and ungrounded photovoltaic power systems.

Standing Seam Metal Roof Clamps POW-TRB-C40

The Powerack clamp can be installed on the roof seam and tightening by screwing the bolts, so it does not need any drilling for roof seam which are suitable. We can also customize based on the roof seam type.

Standard rail clamp POW-RCN

Standard rail clamp with POW nuts.

Klip lok 406&700 roof interface POW-TRB-C02

Powerack 406 & 700 Clamp is designed for Lysaght Klip-lok 406 and 700 roofings. The smart design allows for easy and fast installation.

Solar Panels Cable Clip POW-CCP-06

This Three lines Solar panel cable clips Model POW-CCP-06 is a stainless steel bracket for PV module wires fixing .

Flat tile roof hook POW-TRH-F03

Powerack hooks for flat tile roof .Cost-saving and easy to install.It provides customers lots of options.Customer can customize to their needs and meet the installation requirements.

Solar Panels Cable Clip POW-CCP-07

Cable clip for PV panels for holding 2 cables. which simplify wire management and create a cleaner aesthetic to solar PV arrays.

Trapezoid Metal Roof Hooks POW-TRB-D08

This utility bracket can fit any sizes of trapezoidal type metal roof sheets .

Company profile

All products